Skip to main content

· 15 min read
Justin Young
TitleImage

I love procedural generation. As a hobbyist game developer, it is the concept and technique that I keep reaching for in my games. This article is about Cellular Automata, which follows suit of my previous articles regarding other procedural generation strategies for game development. In my last article, we studied the Wave Function Collapse Algorithm. Staying within that topical thread of procedural algorithms which can be leveraged in game development, let's turn our focus to Cellular Automata.

What is Cellular Automata

Cellular Automata, or CA for short, is an algorithm which has some key potential benefits within the field of game development. You may have seen in certain games, for example Dwarf Fortress or Terraria for example, where organic looking caves are generated, or some map patterns that look naturally grown. Essentially, it uses a grid based data set, and for each discrete unit in that grid, uses the state of all its neighbors to determine the end state of that cell in the ending simulation result.

History of Cellular Automata

Background

The early beginnings of the algorithm originated in the 1940's while scientists were studying crystal growth. That study, plus others including self-replicating robot experiments led to the realization of using a method of treating a system as a collection of discrete units (cells), and calculating their behavior based on the influence of each cell's neighbors. For more details on this: Cellular Automata

The Game of Life

game of life

In the 1970's, James Conway famously created a simulation called the Game of Life. This very simple simulation, which had only four rules, created a very dynamic and varied group of results that bounced between appearing random and controlled order. The rules determined each cell's future state as classified as dying due to underpopulation or overpopulation, creating a new living unit due to reproduction, or just continuing to exist with the correct balance of population around that unit.

Uses in Game Development

There are some common implementations of using Cellular Automata in game development. The classic trope is using the CA algorithm for generating tilemaps of organic looking areas or cave systems.

cave system

Another application is simulating the spread of fire across an area. Brogue is a good example of how this can be used.

cave system

Other aspects is simulating gas expansion in an area, or the spread of a virus, or enemy reproduction simulations for generating new enemies.

The Algorithm

For explaining the CA algorithm, we will demonstrate code snippets that demonstrate TypeScript and using Excalibur.js, but this can be done in any languages and framework of your choice.

Initialization

We start with a grid of tiles that are randomly filled with ones and zeroes.

ts
const tiles:number[]=new Array(49);
// define the blue and white tiles for the TileMap
export const blueTile = new Rectangle({ width: 16, height: 16, color: Color.fromRGB(0, 0, 255, 1) });
export const whiteTile = new Rectangle({ width: 16, height: 16, color: Color.fromRGB(255, 255, 255, 1) });
//Utilizing PerlinNoise plug-in for Excalibur
generator = new PerlinGenerator({
seed: Date.now(), // random seed
octaves: 2,
frequency: 24,
amplitude: 0.91,
persistance: 0.95,
});
// This uses the TileMap object from Excalibur
export const tmap = new TileMap({
tileWidth: 16,
tileHeight: 16,
columns: 7,
rows: 7,
});
// Using the Perlin Noise Field, fill the Tilemap and tiles array with data
let tileIndex = 0;
for (const tile of tmap.tiles) {
const noise = generator.noise(tile.x / tmap.columns, tile.y / tmap.rows);
if (noise > 0.5) {
tiles[tileIndex] = 1;
tile.addGraphic(blueTile);
} else {
tiles[tileIndex] = 0;
tile.addGraphic(whiteTile);
}
tileIndex++;
}
ts
const tiles:number[]=new Array(49);
// define the blue and white tiles for the TileMap
export const blueTile = new Rectangle({ width: 16, height: 16, color: Color.fromRGB(0, 0, 255, 1) });
export const whiteTile = new Rectangle({ width: 16, height: 16, color: Color.fromRGB(255, 255, 255, 1) });
//Utilizing PerlinNoise plug-in for Excalibur
generator = new PerlinGenerator({
seed: Date.now(), // random seed
octaves: 2,
frequency: 24,
amplitude: 0.91,
persistance: 0.95,
});
// This uses the TileMap object from Excalibur
export const tmap = new TileMap({
tileWidth: 16,
tileHeight: 16,
columns: 7,
rows: 7,
});
// Using the Perlin Noise Field, fill the Tilemap and tiles array with data
let tileIndex = 0;
for (const tile of tmap.tiles) {
const noise = generator.noise(tile.x / tmap.columns, tile.y / tmap.rows);
if (noise > 0.5) {
tiles[tileIndex] = 1;
tile.addGraphic(blueTile);
} else {
tiles[tileIndex] = 0;
tile.addGraphic(whiteTile);
}
tileIndex++;
}

The algorithm will have us walk through the grid tile by tile and we will either leave the one or zero in place, or we will flip that value to the opposite, meaning a zero will become a one, and vice versa. The results of this assessment needs to be kept in a new or cloned array, as to not overwrite the starting array's values as you iterate over the tiles.

The Rules

The rules around flipping the values in each cell will depend on each implementation of the CA algorithm. These can be variable rules, each implementation can be unique in that instance. This gives you some agency and control over how you want your simulation to run. I've tailored this function with the flexibility to pass in the rules on each iteration. The rules are regarding how to handle out of bounds indexes, and what cutoff points are being used.

ts
// Defining our CA function, passing in the grid, dimensions, and rules for OOB indexes and cutoff points
export function applyCellularAutomataRules(
map: number[],
width: number,
height: number,
oob: string | undefined,
cutoff0: number | undefined,
cutoff1: number | undefined
): number[] {
const newMap = new Array(width * height).fill(0);
let zeroLimit = 4;
if (cutoff0) zeroLimit = cutoff0 + 1; //this creates the less than effect
let oneLimit = 5;
if (cutoff1) oneLimit = cutoff1; // this creates the greater than or equalto
for (let i = 0; i < height * width; i++) {
for (let x = 0; x < width; x++) {
const wallCount = countAdjacentWalls(map, width, height, i, oob); //counts walls in neighbors
if (map[i] === 1) {
if (wallCount < zeroLimit) {
newMap[i] = 0; // Change to floor if there are less than cuttoff0 adjacent walls
} else {
newMap[i] = 1; // Remain wall
}
} else {
if (wallCount >= oneLimit) {
newMap[i] = 1; // Change to wall if there are cutoff1 or more adjacent walls
} else {
newMap[i] = 0; // Remain floor
}
}
}
}
return newMap;
}
ts
// Defining our CA function, passing in the grid, dimensions, and rules for OOB indexes and cutoff points
export function applyCellularAutomataRules(
map: number[],
width: number,
height: number,
oob: string | undefined,
cutoff0: number | undefined,
cutoff1: number | undefined
): number[] {
const newMap = new Array(width * height).fill(0);
let zeroLimit = 4;
if (cutoff0) zeroLimit = cutoff0 + 1; //this creates the less than effect
let oneLimit = 5;
if (cutoff1) oneLimit = cutoff1; // this creates the greater than or equalto
for (let i = 0; i < height * width; i++) {
for (let x = 0; x < width; x++) {
const wallCount = countAdjacentWalls(map, width, height, i, oob); //counts walls in neighbors
if (map[i] === 1) {
if (wallCount < zeroLimit) {
newMap[i] = 0; // Change to floor if there are less than cuttoff0 adjacent walls
} else {
newMap[i] = 1; // Remain wall
}
} else {
if (wallCount >= oneLimit) {
newMap[i] = 1; // Change to wall if there are cutoff1 or more adjacent walls
} else {
newMap[i] = 0; // Remain floor
}
}
}
}
return newMap;
}

To note, this approach to the CA algorithm is for the sake of THIS article. Other approaches can be implemented. Let's define our rules for the scope of this article.

  • If the starting value for a tile is a zero, then to flip it to a one, the neighbors must have five or more ones surrounding the starting tile.
  • If the starting value for a tile is a one, then to flip it to a zero, the neighbors must have three or fewer ones surrounding the starting tile.
  • For tiles on the edges of the grid, which will not have 8 neighbors, out of bound regions will be treated as ones or 'walls'
ts
tiles = applyCellularAutomataRules(tiles, 7, 7, 'walls', 3, 5);
ts
tiles = applyCellularAutomataRules(tiles, 7, 7, 'walls', 3, 5);

With these rules in place, which can be modified and tailored to your liking, we can use them to determine the next iteration of the grid by going tile by tile and setting the new grid's values based on each tile's neighbors.

Counting Walls

For the rule on out of bound neighbors, you can use a variety of different rules to your liking. You can treat them as constants, like in this instance, we treat them as walls. You can have them be treated as floors, which will change how your simulation runs, producing a more 'open' result. You can also have the out of bound tiles mirror the value of the starting value, i.e. if your starting tile on the edge is a one, then out of bound tiles are all ones, and vice versa.

ts
// This function takes in the grid and dims, which index is being inspected, and the rules on OOB tiles
function countAdjacentWalls(map: number[], width: number, height: number, index: number, oob: string | undefined): number {
let count = 0;
const y = Math.floor(index / width);
const x = index % width;
for (let i = -1; i <= 1; i++) {
for (let j = -1; j <= 1; j++) {
if (i === 0 && j === 0) continue;
const newY = y + i;
const newX = x + j;
if (newY >= 0 && newY < height && newX >= 0 && newX < width) {
const adjacentIndex = newY * width + newX;
if (map[adjacentIndex] === 1) count++;
} else {
switch (oob) {
// The 4 types of rules provided are for constant values, floor and wall, random
// , and mirror
case "floor":
break;
case "wall":
count++;
break;
case "random":
let coinflip = Math.random();
if (coinflip > 0.5) count++;
break;
case "mirror":
if (map[index]==1) count++;
break;
default:
count++; // Perceive out of bounds as wall
break;
}
}
}
}
return count;
}
ts
// This function takes in the grid and dims, which index is being inspected, and the rules on OOB tiles
function countAdjacentWalls(map: number[], width: number, height: number, index: number, oob: string | undefined): number {
let count = 0;
const y = Math.floor(index / width);
const x = index % width;
for (let i = -1; i <= 1; i++) {
for (let j = -1; j <= 1; j++) {
if (i === 0 && j === 0) continue;
const newY = y + i;
const newX = x + j;
if (newY >= 0 && newY < height && newX >= 0 && newX < width) {
const adjacentIndex = newY * width + newX;
if (map[adjacentIndex] === 1) count++;
} else {
switch (oob) {
// The 4 types of rules provided are for constant values, floor and wall, random
// , and mirror
case "floor":
break;
case "wall":
count++;
break;
case "random":
let coinflip = Math.random();
if (coinflip > 0.5) count++;
break;
case "mirror":
if (map[index]==1) count++;
break;
default:
count++; // Perceive out of bounds as wall
break;
}
}
}
}
return count;
}

So starting at the first tile of the grid, you will look at the eight neighbors of the tile, in this instance, five of them are out of bound indexes. You add all the walls up in the neighbors,since the starting value is a zero, if the value is greater or equal to five, in the new grid/array, you will place a one in index zero for the new grid. This is how you flip the values. If, for instance, there would be less than five walls for the neighbors of this index, the value would have remained zero. You repeat this process for each tile in the grid/array.

Redraw your tiles

At the end, when you have completely iterated over each tile, you will have a new grid of tiles that are now set to zeroes or ones, based on that starting array. You can use this new grid as a completed result, or you can re-run the same simulation using this new grid as your 'new' starting array of data.

ts
// function that clears out the existing Tilemap and redraws it based on the new returned tile array
function redrawTilemap(map: number[], tilemap: TileMap, game: Engine) {
game.remove(game.currentScene.tileMaps[0]);
let tileIndex = 0;
for (const tile of tilemap.tiles) {
const value = map[tileIndex];
if (value == 1) {
tile.addGraphic(blueTile);
} else {
tile.addGraphic(whiteTile);
}
tileIndex++;
}
game.add(tilemap);
}
ts
// function that clears out the existing Tilemap and redraws it based on the new returned tile array
function redrawTilemap(map: number[], tilemap: TileMap, game: Engine) {
game.remove(game.currentScene.tileMaps[0]);
let tileIndex = 0;
for (const tile of tilemap.tiles) {
const value = map[tileIndex];
if (value == 1) {
tile.addGraphic(blueTile);
} else {
tile.addGraphic(whiteTile);
}
tileIndex++;
}
game.add(tilemap);
}

Walkthrough of the Algorithm

This walkthrough will simply use an array of numbers. With this array of numbers we will use a noise field, to represent random starting values, and then we will utilize the CA algorithm over multiple steps to highlight how it can be utilized.

Starting Point

Let's start with an empty array of numbers. We will represent the flat array as a two dimensional grid, with x and y coordinates. This is a 7 x 7 grid, which will be an array of forty-nine cells. As we process throught he CA algorithm, we will be recording our results into a new array, as to not overwrite the input array while we are iterating over the indexes.

starting grid

For the CA algorithm, it is suggested to fill the initial array with random ones and zeroes. You can use a Perlin noise field, or a Simplex noise field or just use your languages built in random function to fill the field. Here is ours:

noise field

Now we start the process of looping through each index and either leave them alone of flip the value between 0 and 1 based on the values of the neighbors. For this simulation we treat out of bound indexes as walls.

The first index

first index

The first index of the array is the top left corner of the grid. This is relatively unique in the sense that this index only has three real neighbors. But as we mentioned before, out of bound (OOB) indexes will be treated as walls. If we count up each neighbor index, plus the OOB indexes, we get a value of seven. Since this count is higher than four, we will flip this indexes value to one in the new array we are creating.

new array first index

Iterating

The second index of the array is a one. Now this index only has three OOB indexes that will count as walls.

second index

This index only has one addition one in its neighbors, and if that's added to the three OOB index values, that puts our value to four. In our algorithm we are using today, the value that is required to change a one to a zero is if it has less than four walls as neighbors. With that, we will leave this one in place and insert this value in the new array.

new array second index

We will follow this process for each index with the given rules below:

  • If the original value is one in the starting index, to be set to zero in the new array, the neighbor values have to be less than four.
  • If the original value is zero in the starting index, to be set to one in the new array, the neighbor values need to be five or higher.

Let's speed this process along a bit.

next step

Finishing the first row.

next step 1

Generating the 2nd row.

next step 2

Generating the 3rd row.

next step 3

Generating the 4th row.

next step 4

Generating the 5th row.

next step 5

Generating the 6th row.

next step 6

Generating the Final row.

Now we have a completed array of new values. The thing about the CA algorithm that is favorable is that you can reuse the algorithm again on the new set of values to generate deeper levels of generation on the initial data set.

Let's run the simulation on this new data and see how it turns out.

full second run of sim

So you see how numbers start to collect together to create natural, organic looking regions of walls and floors. This is particularly handy technique for generating cave shapes for tilemaps.

Demo Application

Demo App

Link to Demo

Link to Repo

The demo simply consists of a 36x36 tilemap of blue and white tiles. Blue tiles represent the walls, and white tiles represent the floor tiles. There are two buttons, one that resets the simulation, and the other button triggers the CA algorithm and uses the tilemap to demonstrate the results.

Also added to the demo is access to some of the variables that manipulate the simulation. We can now modify the behavior of the OOB indexes. For instance, instead of the default 'walls', you can now change the sim to use random setting, mirror the edge tile, or set it constant to 'wall' or 'floor'.

You also have to ability to see what happens when you unbalance the trigger points. Above we defined 3 and 5 as the trigger points for flipping a tile's state. You have the ability to modify that and see the results it has on the simulation.

The demo starts with a noise field which is a plugin for Excalibur. Using a numbered array representing the 36x36 tilemap, which has ones and zeroes we can feed this array into the CA function. You can repeatedly press the 'CA Generation Step' button and the same array can be re-fed into the algorithm to see the step by step iteration, and then can be reset to a new noise field again to start over.

Why Excalibur

ExcaliburJS

Small Plug...

ExcaliburJS is a friendly, TypeScript 2D game engine that can produce games for the web. It is free and open source (FOSS), well documented, and has a growing, healthy community of gamedevs working with it and supporting each other. There is a great discord channel for it HERE, for questions and inquiries. Check it out!!!

Conclusions

So, what did we cover? We discussed the history of Cellular Automata and some generalized use cases for CA within the context of game development. We covered the implementation of the steps to take to perform the simulation on a grid of data, and then we conducted a walk through example of using the algorithm. Finally, we introduced a demo application hosted on itch, and shared the repository in case one is interested in the implementation of it.

This algorithm is one of the easier to implement, as the steps are not that complicated either in cognitive depth or in mathematical processing. It is one of my favorite simple tools that reach for especially for tilemap generation when I create levels. I urge you to give it a try and see what you can generate for yourself!

· 11 min read
Justin Young

One challenge of indie game development is about striking a balance. Specifically, the balance between hand crafted level design, player replayability, and the lack of enough hours in a day to commit to being brilliant at both. This is where people turn to procedural generation as a tool to help strike that balance. One of the most magical and interesting tools in the proc gen toolbox is Wave Function Collapse (WFC). In this article, we'll dive into the how/why of WFC, and how you can add this tool to your repertoire for game development.

WFC is a very popular procedural generation technique that can generate unique outputs of tilemaps or levels based off prompted input images or tiles. WFC is an implementation of the model synthesis algorithm. WFC was created by Maxim Gumin in 2016. The WFC algorithm is VERY similar to the model synthesis algorithm developed in 2007 by Paul Merrell. For more information on WFC specifically, you can review Maxim's Github repo here.

It is based off the theory from quantum mechanics. Its application in Game Development though is a bit simpler. Based on a set of input tiles or input image, the algorithm can collapse pieces of the output down based on the relationship of that tile or image area.

Example input image:

input tileset (Yes I do have an unhealthy fascination with the original Final Fantasy)

Example output images:

drawing drawing

Entropy

Digging into the quantum mechanics context of WFC will introduce us to the term Entropy. Entropy is used as a term that describes the state of disorder. The way we will use it today is the number of different tile options a certain tile can be given the state of its neighbor tiles. We will demonstrate this further down.

The concept essentially states that the algorithm selects the region of the output image with the lowest possible options, collapses it down to its lowest state, then using that, propogating the rules to each of the neighbor tiles, thus limiting what they can be. The algorithm continues to iterate and collapsing down tiles until all tiles are selected. The rules are the meat and potatoes of the algorithm. When you setup the algorithm's run, you not only provide the tileset, but also the rules for what tiles can be

For this discussion, as the demo application focuses on using WFC with the ExcaliburJS game engine, we are focusing on the simple tile-based WFC approach.

Walkthrough of the algorithm

The Rules

The rules are arguably the most critical aspect of the algorithm. For the simple tile-based mapping, this includes details and mappings between each tile and what other tiles can be used as neighbors. If you were doing the input image form of WFC, the input image's design would dictate the rules pixel by pixel.

Let us consider this subsection of the tilemap to demonstrate this:

subsection of tileset

Let's identify each tile as tree, treetop, water, road, and grass. For the sake of simplicity, we will focus on just four of them: tree,water, grass, and treetop.

We will define some rules for the tiles as such.

ts
let treeTileRules = {
up: [treeTopTile, grassTile, waterTile],
down: [grassTile, waterTile, treeTile],
left: [grassTile, waterTile, treeTile],
right: [grassTile, waterTile, treeTile],
};
let grassTileRules = {
up: [treeTile, grassTile, waterTile],
down: [grassTile, waterTile, treeTile],
left: [grassTile, waterTile, treeTile],
right: [grassTile, waterTile, treeTile],
};
let treeTopTileRules = {
up: [grassTile, waterTile, treeTopTile],
down: [treeTile],
left: [grassTile, waterTile, treeTile],
right: [grassTile, waterTile, treeTile],
};
let waterTileRules = {
up: [treeTile, grassTile, waterTile],
down: [grassTile, waterTile, treeTile],
left: [grassTile, waterTile, treeTile],
right: [grassTile, waterTile, treeTile],
};
ts
let treeTileRules = {
up: [treeTopTile, grassTile, waterTile],
down: [grassTile, waterTile, treeTile],
left: [grassTile, waterTile, treeTile],
right: [grassTile, waterTile, treeTile],
};
let grassTileRules = {
up: [treeTile, grassTile, waterTile],
down: [grassTile, waterTile, treeTile],
left: [grassTile, waterTile, treeTile],
right: [grassTile, waterTile, treeTile],
};
let treeTopTileRules = {
up: [grassTile, waterTile, treeTopTile],
down: [treeTile],
left: [grassTile, waterTile, treeTile],
right: [grassTile, waterTile, treeTile],
};
let waterTileRules = {
up: [treeTile, grassTile, waterTile],
down: [grassTile, waterTile, treeTile],
left: [grassTile, waterTile, treeTile],
right: [grassTile, waterTile, treeTile],
};

What these objects spell out is that for tiles above the tree tile, it can be a grass, water, or treetop tile. Tiles below the treetile can be another tree tile, or water, or grass... and so on. One special assignement to note, that below a treeTop tile, can ONLY be a treeTile.

We can proceed to follow this pattern for each of the tiles, outlining for each tile what the 4 neighbor tiles CAN be if selected.

The Process

The process purely starts out with an empty grid... or you actually can predetermine some portions of the grid for the algorithm to build around... but for this explanation, empty:

drawing

Given that none of the tiles have been selected yet, we can describe the entropy of each tile as essentially Infinite, or more accurate, N number of available tiles to choose from. i.e. , if there are 5 types of available tiles, then the highest entropy is 5, and each tile in this grid is assigned that entropy value.

If we entered the algorithm with predetermined tiles, or what we could call collapsed, then the entropy of the surrounding neighbors of those tiles would have a lower entropy as dictated by the rules we discussed above.

Let's begin by selecting a random tile on this grid... {x: 3,y: 4}. Due to the fact that all its neighbors are empty, it's pool of available tiles is 4, tree, grass,water, or tree top. Let us pick tree, as this can simply be randomly picked from the set.

drawing

This leads us into the idea of looping through all the tiles and setting their entropy value based on what their neighbors are... we have 4 available tiles for this experiment, so 4 will be the highest entropy value.

drawing

Take note that the neighbors of our fully collapsed tile are not at entropy 4, but at 3, as for each of these neighbors, our 'rules' for the tree tile reduces their possible options. So now we start the process again, but instead of randomly selecting any tile, we will form a list of the lowest entropy tiles, and that becomes our available pool. So, in this example:

[{x:3,y:3}, {x:2,y:4}, {x:4, y:4}, {x:3,y:5}] all have entropy values of 3, so they are what we select.

4,4 is selected from that pool, and based on the rules, it can be grass, water, or tree. Randomly selected: tree again. Looping through the tiles and resetting the entropy, we get a new pool of tiles.

drawing

4,3 is the next selected from the new pool of lowest entropy tiles, and it becomes a grass tile. Looping through the tiles and resetting entropy, we notice something different.

drawing

We see our first shift in the pool of lowest entropy. The reason behind tile 3,3 being entropy level 2 is due to the rules of grass and tree tiles.

ts
let treeTileRules = {
up: [treeTopTile, grassTile, waterTile],
down: [grassTile, waterTile, treeTile],
left: [grassTile, waterTile, treeTile],
right: [grassTile, waterTile, treeTile],
};
let grassTileRules = {
up: [treeTile, grassTile, waterTile],
down: [grassTile, waterTile, treeTile],
left: [grassTile, waterTile, treeTile],
right: [grassTile, waterTile, treeTile],
};
ts
let treeTileRules = {
up: [treeTopTile, grassTile, waterTile],
down: [grassTile, waterTile, treeTile],
left: [grassTile, waterTile, treeTile],
right: [grassTile, waterTile, treeTile],
};
let grassTileRules = {
up: [treeTile, grassTile, waterTile],
down: [grassTile, waterTile, treeTile],
left: [grassTile, waterTile, treeTile],
right: [grassTile, waterTile, treeTile],
};

The left field for grass tiles allows for grass, water, and tree... while the up field for tree only allows grass, water, and treetop. So between those two fields, there are only 2 tile types that match both requirements, thus there are only 2 available tiles to select and now and entropy of 2.

The next iteration of the algorithm has only one tile in its pool of lowest entropy, 3,3 so it gets collapsed to either water or grass based on its neighbors, so it becomes grass as a random selection.

drawing

This algorithm carries on until there are no more tiles to collapse

drawing drawing drawing drawing drawing drawing drawing

One note on this example is that we have really limited the amount of different tiles that are being accessed, and you see this manifest itself in the entoropies of 3,4 consistently. The rules also are fairly permissive, which is why we don't see a huge variation of entropies. More tiles available, and more restrictive rules, will drive much more variation in the entropy scores that will be witnessed.

Collisions

What you will find with this algorithm that there maybe created a conflict where there is no available tiles to select based on the neighbors. This is called either a conflict or a collision, and can be handled in a couple different ways.

One thought is to reset the map and try again. From a process perspective, sometimes this is just the easiest/cheapest method to resolve the conflict.

Another approach is to use a form of the command design pattern, and saving a stack of state snapshots that are captured during each step of the algorithms iteration, and upon reaching a collision, 'backtrack' a bit and retry and generate again from a previous point. The command design pattern essentially unlocks the undo button for an algorithm, and allows for this.

Demo Application

demo app

Link To Repo

Link To Demo

The demo application that's online is a simple, quick simulation that runs a few algorithm iterations... and can regenerate the simulation on Spacebar or Mouse/Touch tap.

First, it uses WFC to generate the terrain, only using the three tiles of grass, tree, treetops.

Second, it finds spots to draw two buildings. The rules around this is to not collide the two buildings, and also not have the buildings overrun the edges of the map. I use WFC to generate random building patterns using a number of tiles.

Finally, and this has nothing to do with WFC, I use a pathfinding algorithm I wrote to find a path between the two doors of the houses,and draw a road between them... I did that for my own amusement.

Pressing the spacebar in the demo, or a mouse tap, attempts to regenerate another drawing. Now, not every generation is perfect, but this seems to have a >90% success rate, and for the purposes of this article, I can accept that. I intentionally did not put in a layer of complexity for managing collisions, as I wanted to demonstrate what CAN happen using this method, and how one needs to account for that in their output validation.

Why Excalibur

ExcaliburJS

Small Plug...

ExcaliburJS is a friendly, TypeScript 2D game engine that can produce games for the web. It is free and open source (FOSS), well documented, and has a growing, healthy community of gamedevs working with it and supporting each other. There is a great discord channel for it HERE, for questions and inquiries. Check it out!!!

Conclusions

Wrapping up, my goal was to help demystify the algorithm of Wave Function Collapse. There are some twists to the pattern, but overall it is not the most complicated of generation processes.

We also discussed the concept of Entropy, and how it applies to the algorithm overall, in essence it helps prioritize the next tile to be collapsed. Collapsing a tile is simply the process of picking from of available tiles that a specific tile CAN be by means of the rules provided.

In my experience, and I've done a few WFC projects, the rules provide the constraints of the algorithm. Ultimately, it is where I always spend the most time tweaking and adjusting the project. Too tight of rules, and you'll need to be VERY good at managing collisions. However, too few rules, and you're output maybe a very noisy mess.

I suggest you give WFC a try, it can be VERY fun and rewarding to see the unique solutions it can come up with.

· 12 min read
Justin Young
demo banner

This is a continuation of our discussion on pathfinding. In the first part of our discussion, we investigated Dijkstra's algorithm. This time, we are digging into A* pathfinding.

Link to Part 1

Link to Pathfinding Demo

Pathfinding, what is it

Quick research on pathfinding gives a plethora of resources discussing it. Pathfinding is calculating the shortest path through some 'network'. That network can be tiles on a game level, it could be roads across the country, it could be aisles and desks in an office, etc. etc.

Pathfinding is also an algorithm tool to calculate the shortest path through a graph network. A graph network is a series of nodes and edges to form a chart. For more information on this: click here.

For the sake of clarity, there are two algorithms we specifically dig into with this demonstration: Dijkstra's Algorithm and A*. We studied Dijkstra's Algorithm in Part 1.

A* Algorithm

A star is an algorithm for finding the shortest path through a graph that presents weighting (distances) between different nodes. The algorithm requires a starting node, and an ending node, and the algorithm uses a few metrics for each node to systematically find the shortest path. The properties of each node are fCost, gCost, and hCost. We will cover those in a bit.

A star visualization

Quick History

The A* algorithm was originated in its first state as a part of the Shakey project. That project was about designing a robot that could calculate its own path and own actions. In 1968, the first publishing of the A* project happened and it describes its initial heuristic function for calculating node costs.

A heuristic function is a logical means, not necessarily perfect means, of solving a problem in a pragmatic way.

Over the years the A* algorithm has been refined slightly to become more optimized.

Algorithm Walkthrough

Load the Graph

We first load our graph, understanding which nodes are clear to traverse, and which nodes are blocked. We also need to understand the starting node and ending node as well.

Cost the nodes

We first will assess the cost properties for each node. Cost is a term we are using that represents a distance between nodes. This will be a method that assigns the fCost, gCost, and hCost to each node.

Let's discuss these costs first. The costs are a weighting of each node with respect to its positioning between the starting and ending nodes.

The fCost of a tile is equal to the gCost plus the hCost. This is represented as such:

f=g+h

The gCost of the node is the distance cost between the current node and the starting node.

The hCost of the node is the 'theoretical' distance from the current node to the ending node. This is why we discussed heuristics earlier. This value is an estimate of the distance, a best guess. This makes guessing for a rectangular tilemap easy, since all tiles are distance 1 from each other in a grid, the method of guessing is just using the tile positions of the two nodes and using Pythagorean theorem to assess the distance. If the grid is irregular, some spatial data may need to be injected into the graphs creation to facilitate this heuristic, for example: x/y coordinate locations maybe.

Thus, the fCost is the sum of these two values. While simplistic, this is the value that is leveraged in the algorithm to determine the 'best' path.

Setup Buffers

After we've looped through all the nodes and costed them appropriately, we will utilize a buffer called openNodes. We will push the starting node into this, as it is the only node we 'know' about as of yet. We will use this openNodes buffer for much of the iterations we conduct in this algorithm.

We will leverage another buffer we will call either 'checked' or 'closed' buffer, and this is where the results of our algorithm will exist, as we process tiles from openNodes into this buffer.

Iteration

Then we get into the repeating part of the algorithm.

  1. Look for the lowest F cost square in the open list. Make it the current square.

  2. Move the current square to the closed buffer (list). Remove from openNodes, move to 'checked' nodes.

  3. Check if the new current node is the endnode, this is the finishing condition. using the parent node properties of each node, walk backwards to the starting node, that's the shortest path

  4. If not ending node, review all neighbor squares of current square, if a neighbor is not traversable, ignore it

  5. Check each neighbor is in checked/closed list of nodes, if not, perform parent assignment, and add to open node list

This series continues to iterate while neighbors are being added to the open node list.

Example

Let's start with this example graph network.

starting grid

We will manage our walkthrough with two different lists, open nodes and checked nodes. Black tiles above represent nodes that are not traversable. Let's define our start and stop nodes as indicated by the green S node and the blue E node.

The first step of A* algorithm is costing all the nodes, and let's see if we can show this easily.

For more clarity on the 'costing' step, let's talk through the core loop that is applied to each tile.

My process is to loop through each tile, and assuming it has either coordinates or and index, I can determine its distance from the start node and end node.

Let's do the first tile together. The first tile is coordinates (x:0, y:0), and the start node is coordinates (x: 1, y:1), while the end node is (x: 4,y:5). The gCost for this tile we can use Pythagorean theorem to calculate the distance as the hypotenuse.

js
gCost = Math.sqrt(Math.pow((1-0), 2) + Math.pow((1-0)), 2));
js
gCost = Math.sqrt(Math.pow((1-0), 2) + Math.pow((1-0)), 2));

This gives us a gCost of ~1.41.

We can repeat this equation for the hCost, but it is with respect to the end node coordinates.

js
hCost = Math.sqrt(Math.pow((4-0), 2) + Math.pow((5-0)), 2));
js
hCost = Math.sqrt(Math.pow((4-0), 2) + Math.pow((5-0)), 2));

This yields a hCost of ~6.40.

Knowing both now, we can determine the fCost of that node or tile, by adding the two together, making the fCost 7.82... with rounding.

We can repeat this process for each tile in the graph.

costed grid

Why am I using floating point values here? There's a reason, if I simply use integers, then the distances wouldn't have enough resolution in digits, creating a little more unoptimized iterations, as the number of cells with equal f Costs would increase, here the fCosts are more absolute, and we will reduce the iterations. Simply put, if all the fCosts between 5.02 - 5.98 all are represented as 5 as an integer, it muddies up how the algorithm moves through and prioritizes the 'next' cell to visit. With floating points, this is explicit. Being a grid, all the distances are simple hypotenuse calculations using Pythagorean theorem.

Before we jump into the overall repetitive loop, we will add the startnode into our list of opennodes.

Now the algorithm can start to be repetitive. We set the startnode to the current node, and move it from open to checked lists.

We first check if our current node is the end node, which it is not, so we proceed.

The next step is to select the lowest fCost, and since the starting node is the only node in openlist, it gets selected, otherwise we would have selected randomly from the lowest value fCosts in the open node list. Now we look at all the neighbors. I will designate the pale yellow as our 'open node' list. We will use different colors for 'checked'.

first neighbors

None are in the checked list, so we add them all to the opennodes list, and assign the current node as each nodes parent. To note, if a node is not traversable (black) then it gets ignored at this point, and not added to the list.

This then repeats as long as nodes are in the open node list, if we run out of open nodes without hitting the end node, then there's no path. When we hit the end node, we start building our return list by looping back through the parent nodes of each node. Starting at the end node, it will have a parent, that parent will have a parent... and so on until you hit the start node.

Let's walk through the example. Let's pick a tile with lowest f cost. As we select new 'current' nodes, we move that node to our checked list so it no longer is in the open node pool.

picking lowest fcost

The lowest cost is 5.02, and grab its neighbors. Along the way we are assigning parent nodes, and adding the new neighbors to the openNodes list.

next group fcost

...but we keep selecting lowest cost node ( f cost of 5.06 is now the lowest to this point), we add neighers to opennodes, assign them parent nodes...

and next

.. the next iteration, the fCost of 5.24 is now lowest, so it gets 'checked', and we grab its neighbors, assign parents..

first duplicate fcost

.. the next iteration, there are two nodes of 5.4 cost, so let's see how this CAN play out, and the algorithm starts to make sense at this point.

Let's pick the high road...

high road

The new neighbors are assigned parents, and are added to the overall list of open nodes to assess. Which is the new lowest fCost now? 5.4 is still the lowest fCost.

correction

Yes, the algorithm went back to the other path and found a better next 'current' node in the list of open nodes. The process is almost complete. The next lowest fCost is 5.47, and there is more than one node with that value, so for the sake of being a completionist...

completionist trophy

Still the lowest fCost is 5.47, so we select the next node, grab neighbors, assign parents... one thing I did differently on this table is showing the fCost of the ending node, which up till now wasn't necessary, but showing it here lets one understand how the overall algorithm loops, because the end node HAS to be selected as the next lowest cost node, because the check for end node is at the beginning of the iteration, not in the neighbor eveluation. So in this next loop, I don't make it yellow, but the end node is now been placed AS A NEIGHBOR into the list of open nodes for evaluation.

finishing up

We now have our path, because the next iteration, the first thing we'll do is pick the lowest node fCost (5.0) and make it the current tile, and then test if it is the end node, which is true now.

We can return its path walking back all the parent node properties and see how we got there along the way.

The test

demo introduction

Link to Demo

Link to Github Project

The demo is a simple example of using a Excalibur Tilemap and the pathfinding plugin. When the player clicks a tile that does NOT have a tree on it, the pathfinding algorithm selected is used to calculate the path. Displayed in the demo is the amount of tiles to traverse, and the overall duration of the process required to make the calculation.

Also included, are the ability to add diagonal traversals in the graph. Which simply modifies the graph created with extra edges added, please note, diagonal traversal is slightly more expensive than straight up/down, left/right traversal.

Why Excalibur

Small Plug...

ExcaliburJS

ExcaliburJS is a friendly, TypeScript 2D game engine that can produce games for the web. It is free and open source (FOSS), well documented, and has a growing, healthy community of gamedevs working with it and supporting each other. There is a great discord channel for it HERE, for questions and inquiries. Check it out!!!

You can also find it on GitHub.

Conclusion

For this article, we briefly reviewed the history of the A* algorithm, we walked throught the steps of the algorithm, and then applied it to an example graph network.

This algorithm I have found is faster than Dijkstra's Algorithm, but it can be tricky if you're not using a nice grid layout. The trick comes into the 'guessing' heuristic of the distance between the current node and the endnode (hCost). If you using a grid, you can use the coordinates of each node and calculate the hypotenuse as the hCost. If it is an unorganized, non standard shaped graph network, this becomes trickier. For the moment, for the library I created, I am limiting A* to grid based tilemaps to make this much simpler. If the grid is not simple, I use Dijkstra's algorithm.

· 6 min read
Justin Young

One of the most common problems that need solved in game development is navigating from one tile to a separate tile somewhere else. Or sometimes, I need just to understand if that path is clear between one tile and another. Sometimes you can have a graph node tree, and need to understand the cheapest decision. These are the kinds of challenges where one could use a pathfinding algorithm to solve.

Image of pathfinding demo

Link to Pathfinding Demo

Pathfinding, what is it

Quick research on pathfinding gives a plethora of resources discussing it. Pathfinding is calculating the shortest path through some 'network'. That network can be tiles on a game level, it could be roads across the country, it could be aisles and desks in an office, etc etc.

Pathfinding is also an algorithm tool to calculate the shortest path through a graph network. A graph network is a series of nodes and edges to form a chart. For more information on this: click here

For the sake of clarity, there are two algorithms we specifically dig into with this demonstration: Dijkstra's Algorithm and A*.

We study A* more in Part 2

Quick History

Dijkstra's Algorithm

Dijkstra's Algorithm is a formula for finding the shortest path through a graph that presents weighting (distances) between different nodes. The algorithm essentially dictates a starting node, then it systematically calculates the distance to all other nodes in the graph, thus, giving one the ability to find the shortest path.

Graph Network

Edsger Dijkstra, was sipping coffee at a cafe in Amtserdam in 1956, and was working through a mental exercise regarding how to get from Roggerdam to Groningen. Over the course of 20 minutes, he figured out the algorithm. In 1959, it was formally published.

Algorithm Walkthrough

Dijkstra's Algorithm

Graph Network

Let's start with this example graph network. We will manage our walkthrough using a results table and two lists, one for unvisited nodes, and one for visited nodes.

Let's declare A our starting node and update our results object with this current information. Since we are starting at node A, we then review A's connected neighbors, in this example its nodes B and C.

starting chart

Knowing that B is distance 10 from A, and that C is distance 5 from A, we can update our results chart with the current information.

With that update, we can move node A from unvisited to visited list, and we have this new state.

Visiting A

Now the algorithm can start to be recursive. We identify the node with the smallest distance to A of our unvisited nodes. In this instance, that is node C.

Now that we are evaluating C, we start with identifying its unvisited neighbors, which in this case is only node D. The algorithm would update all the unvisited neighbors with their distance, adding it to the cumulative amount traveled from A to this point. So with that, D has a distance of 15 from C, and we'll add that to the 5 from A to C.

We continue to repeat this algorithm until we have visited all nodes.

From here we will quickly loop through the rest of the table.

This is when we visit node C:

Visitng C

Node B is closer to Source than node D, so we visit it next.

Visiting B

Unvisited neighbors of B are E and F. E is closes to A, so we visit it next.

D is E's unvisited neighbor, but its distance via E is longer than what's already in the result index, so we do not add this data up.

D is the only unvisited neighbor, and we hit a dead end on this branch, so D gets visited, but with no updates to the results table

Visiting D

So since we are looping through all unvisited Nodes, F is the final unvisited node, and its a neighbor of B. We can now visit F through B, and we do not have any results table updates with this visit, as F has no unvisited neighbors.

What do we do with this data?

My library module for using this algorithm includes a method that runs the analysis, then uses the results table to get the shortest path.

It takes in the starting node, and ending (destination) node and returns the list of nodes needed to traverse the path.

ts
shortestPath(startnode: Node, endnode: Node): Node[] {
let dAnalysis = this.dijkstra(startnode);
//iterate through dAnalysis to plot shortest path to endnode
let path: Node[] = [];
let current: Node | null | undefined = endnode;
while (current != null) {
path.push(current);
current = dAnalysis.find(node => node.node == current)?.previous;
if (current == null) {
break;
}
}
path.reverse();
return path;
}
ts
shortestPath(startnode: Node, endnode: Node): Node[] {
let dAnalysis = this.dijkstra(startnode);
//iterate through dAnalysis to plot shortest path to endnode
let path: Node[] = [];
let current: Node | null | undefined = endnode;
while (current != null) {
path.push(current);
current = dAnalysis.find(node => node.node == current)?.previous;
if (current == null) {
break;
}
}
path.reverse();
return path;
}

So for Example, if I said starting node is A, and endingnode is D, then the returned array would look like.

ts
//[Node C, Node D]
ts
//[Node C, Node D]

If you need the starting node in the path, you can unshift it in.

ts
path.unshift(startnode);
//[Node A, Node C, Node D]
ts
path.unshift(startnode);
//[Node A, Node C, Node D]

The test

Demo Test

Link to Demo

Link to Github Project

The demo is a simple example of using a Excalibur Tilemap and the pathfinding plugin. When the player clicks a tile that does NOT have a tree on it, the pathfinding algorithm selected is used to calculate the path. Displayed in the demo is the amount of tiles to traverse, and the overall duration of the process required to make the calculation.

Also included, are the ability to add diagonal traversals in the graph. Which simply modifies the graph created with extra edges added, please note, diagonal traversal is slightly more expensive than straight up/down, left/right traversal.

Conclusion

In this article, we reviewed a brief history of Dijkstra's Algorithm, then we created and example graph network and stepped through it using the algorithm, and then was able to use it to determine the shortest path of nodes.

This algorithm I have found is more expensive than A*, but is a nice tool to use when you don't understand the shape and size of the graph network. As a programming exercise, I had a lot of fun interating on this problem till I got it working, and it felt like an intermediate coding problem to tackle.

· 8 min read
Justin Young

I have been in need of an AI system that can execute a simulation that I desire to run. In my research, I have come across Goal-Oriented Action Planning. This technique can give me the flexibility I need to run my simulation, let's dive into the implementation a bit.

Link to GOAP Demo

GOAP, what is it

Goal-Oriented Action Planning, or GOAP, is a flexible AI technique that enables the developer build up a set of actions and objectives, and allows the NPC (agent) itself determine what the best objective is, and how to accomplish said objective.

GOAP includes the use of Agents, Goals, Actions, and State, to plan out its next series of decisions and activities. This is a useful system for Non-Playable Characters(NPCs) or enemy AI logic.

Quick History

GOAP was developed by Jeff Orkin in the early 2000's while working on the AI system for F.E.A.R.

The desire was to generate automated planning sequences for Enemies and NPCs to create a more immersive game experience.

GOAP can be considered an alternative to classic behavioral trees, which was more standard at that time.

Theory of operations

There are 5 aspects of GOAP that interact to create the magic: State, Agents, Goals, Actions, and the Planner.

flow of GOAP

First, let's talk about State.

State

State is the data set conditions that describes the world in which an agent exists. For my implementation, an established set of key/value pair data was used to fuel the simulation. A simple example of a world state:

ts
world = {
trees: 3;
bears: 1;
playerPosition: {x: 100, y:200};
};
ts
world = {
trees: 3;
bears: 1;
playerPosition: {x: 100, y:200};
};

This is the data that gets used, not only as a starting point, but gets cloned and mutated over the course of the algorithm processing the plan.

Goals

Next, let us review the goals or objectives that are intended to be accomplished. The goal defines the target state that the algorithm evaluates against to determine if the objectives are met.

The goal assessment will take a copy of the mutated state and compare it against the target state defined for the goal, and if it matches, let's the algorithm know that is done with that branch of evaluation.

The goal also contains a method of assessing its own priority conditions, which takes in the world state and returns a defined factor of prioritization. For example, a floating-point value from 0.0 to 1.0, where 1.0 is the highest priority.

Agents

Agencts are the entities (enemies or other NPCs) that get the planning system attached to it. If the entity is not currently executing a plan, it can call the planning process to assess what it should do next.

One aspect of the agents that is important to remember, is including the ability to cancel the plan, and reassess, even if the sequence isn't complete.

Think about if the environment in which the current plan was created, no longer is viable, you need to be able to change your mind. i.e. a power up is no longer available, or a targeted enemy is dead, etc...

Actions

Actions are very discrete units of activity:

  • Move to spot
  • Pick up Item
  • Fire weapon
  • Duck

These actions should have a cost component, time or energy is common, and the actions will be linked together to form a sequence of actions that constitutes 'plan'.

What is unique about components of an action beyond cost, is the precondition and effect components. These are super important.

The precondition component is what the planner evaluates if the action is viable under the current condition. The current condition is the cloned, mutated state that is considered for that sequence of the plan.

If the conditions are true for the precondition, then the action is considered an available choice for the next step.

The effect component of an action is the defined changes to state that occur when that action is executed. This is used by the planner to clone and mutate the state as it churns through the different possible options.

Planner

The planner is the algorithm which generates the plan, and it has several tasks. To use the Planner, you pass the current world state, all available actions for the agent, all available goals for the agent.

The planner's first task is to assess all available goals for the agent to determine which is the highest priority.

Then, with that goal selected and the current world state, find a list of actions that can be executed.

With your state, your goal, and your available actions, you can start building a graph network, a branching tree of available plans.

When the graph is constructed, the planner can assess the best course of action based on any number of custom factors, and returns the sequence of actions as the plan.

The algorithm

There are two aspects of the algorithm that should be discussed. The graph network and the assessment.

The graph network

Building the Graph

The graph network is built with a recursion that forms a tree structure, and branching is based on the new available list of actions that meet the mutated state condition, for that branch.

As you walk through each branch, the actions taken at each node will mutate the state. That mutated stated then gets checked against the goal provided, to see if you are done.

If the goal passes, an endnode is created. If not, then that newly mutated state is used to generate the new list of available actions and the recursion continues.

The recursion ends when a branch's mutated state cannot create further list of actions, or the goal is met.

Picking a plan

Once the graph is assembled, you can filter out any branches that do not end in a completed goal, then the Planner can assess which path makes most sense.

This is where you can have different style planners. The planner i created simply creates a 'cheapest cost' plan based on the the aggregate cost of each plan created.

I use a dijkstra's algorithm to calculate, based on each actions 'cost', the cheapest path to execute.

But there is flexibility here as well, including using different costing structures, maybe you want to balance energy and time both? Then you could construct a planner that favors one over the other based on conditions.

The test

Demo Test

Link to Demo

I spent a couple weeks building a simulation of my GOAP library that I created. It is a simple "actor feeds fire with wood, while avoiding bears" simulation.

The Actor has two goals, "keep fire aive", and "avoid bear"

If the actor is currently without a plan to execute, it passes its worldstate into the planner. The world state looks vaguely like this:

ts
export const world = {
tree: 500,
tree2: 500,
tree3: 500,
campfire: 0,
player: 0,
playerState: playerState.idle,
bearDistance: 300,
};
ts
export const world = {
tree: 500,
tree2: 500,
tree3: 500,
campfire: 0,
player: 0,
playerState: playerState.idle,
bearDistance: 300,
};

The actions available are:

ts
player.goapActions = [
feedFireAction,
collectWoodAction,
moveToTreeAction,
moveToFireAction,
moveToTree2Action,
collectWood2Action,
moveToTree3Action,
collectWood3Action,
runAwayAction,
relaxAction,
];
ts
player.goapActions = [
feedFireAction,
collectWoodAction,
moveToTreeAction,
moveToFireAction,
moveToTree2Action,
collectWood2Action,
moveToTree3Action,
collectWood3Action,
runAwayAction,
relaxAction,
];

When the planner is fed these components, it assesses the priority of each action based on their weighting, is the fire getting low? or is the bear close by?

With the goal selected, it uses the state data to determine which actions to take, for the fire building, the first round of actions usually are moving to trees. That is unless the player is holding some wood, then it will decide to just go to the fire directly.

If the player moves to a tree, it then collects its wood, then it moves to fire, and feeds the fire, and it waits till the fire gets lower before going to collect more wood.

I mentioned earlier that agents have to be able to cancel their plans. If the bear comes close to the player, it triggers a cancelPlan() method and the player is forced to generate a new plan.

Since the bear is close, it picks "avoid bear" plan, and then the process starts again with that new goal.

Conclusion

We have covered GOAP, some history of it, what the components of a GOAP system are, and how to implement them.

What I have learned in this process is that GOAP is very powerful and flexible. That does not imply that GOAP is easy, I would consider implementing a GOAP system at the intermediate level.

When trying to connect different actions and insuring they chain together to form a complete plan, there are many chances in implementation to create issues. But when dialed in, GOAP can provide a foundation for a very flexible AI system that can lead to enriching gameplay.

· 3 min read
Jae Edeen

The Excalibur team has built a number of games over the years. During our last few game jams, we started paper prototyping soon after our brainstorming process. It’s been working great and we highly recommend giving it a try!

More flexibility

Changing rules or mechanics that only exist on paper is a lot faster than having to adjust any code you may have written for those changes. It’s possible to alter your game without much worry, because you’re operating primarily in the realm of imagination, rather than within the constraints of your software development environment.

Paper prototyping can also help avoid the “sunk-cost fallacy”, which encourages you to stick with whatever you’ve spent a lot of time on just because you’ve spent a lot of time on it. Instead, you can change as much or as little as you wish without having to worry about deleting a bunch of code that you’ve already written.

Identify problems early

You also have the opportunity to fix game design problems before you've devoted time to implementing them in the actual software. While we were paper prototyping Sweep Stacks, we uncovered a game design complication with how the board filled up over time. Without having to write any code, we were able to determine a solution for the issue and implement it directly when we started programming the game.

Easier once you start writing code

If you’ve spent time prototyping, you'll have a more concrete idea of what you want your game to be. When you actually start writing code, you can begin with a more specific idea of what you want to accomplish. We’ve found it’s much easier to visualize and architect our code when we have a clear idea of how the rules and systems of a game will work together.

Virtual paper

While it's called “paper prototyping”, this process doesn't literally have to be done with paper, or any physical components at all. Virtual paper prototyping can be just as effective, and allows you to collaborate more easily with remote teammates. There are plenty of wireframing and “virtual tabletop” web apps out there that you can use to put together a digital prototype for your game (we usually use Excalidraw).

Give paper prototyping a try

The next time you’re working on a game, try doing some prototyping before you write any code. Adjust your rules, modify your designs, and dream of what you want to build.

· 6 min read
Erik Onarheim

Updated to the latest Excalibur, Capacitor.js & Parcel!

In this post we put a web canvas game built in Excalibur into an Android (or iOS) app with Capacitor.js!

In the past I would have used something like Cordova, but this new thing from the folks at Ionic has TypeScript support out of the box for their native APIs and support for using any Cordova plugins you might miss.

TLDR show me the code

Capacitor Setup

The capacitor project setup is pretty straightforward from their docs, it can drop in place in an existing project or create a brand new project from scratch.

I opted for the brand new project:

> npm init @capacitor/app
> npm init @capacitor/app

Then follow their wizard and instructions to configure.

After that step add the platforms you're interested in, in this case Android

> npx cap add android
> npx cap add android

I recommend reading the capacitor documentation on workflow with a hybrid native app. The gist is this

  1. Run npx cap sync to copy your web project into capacitor
  2. Run npx cap run android to start the project on android (or start in the Android SDK)

Android Setup

Before you try to run the project

  1. Download Android Studio Android Studio
  2. Open it up and check for updates if needed (first time initialization takes some time)
  3. Accept your SDK package licenses, the easiest way I've found to do this is with the SDK command line tools with Powershell on W.
    1. Find the SDK Manager Android Studio SDK Manager
    2. In SDK Tools, check Android SDK Command-line Tools SDK Tools Command-line
  4. Next we need to accept licenses. Android SDK location
    • In powershell, navigate to the Android SDK Location for command line tools C:\Users\<username>\AppData\Local\Android\Sdk\cmdline-tools\latest\bin
    • Set your java home temporarily $env:JAVA_HOME = 'C:\Program Files\Android\Android Studio\jre'
    • Run .\sdkmanager.bat --licenses and select y for each

Starting the App

Now that we have Android all setup we can start the app with the capacitor command line.

The gist is that it copies the final compiled html/css/js assets from your favorite frontend frameworks and build tools into the native container

> npx cap sync
> npx cap sync

After that we can open it in Android Studio with the capacitor commandline

> npx cap open android
> npx cap open android

Building the project and running the first time can take some time, so be patient after hitting the big green play button.

Android Studio Start Bar with Green Play Triangle Button

ProTipTM The Emulator is MEGA slow to start so once you get it on, leave it on. You can redeploy the app to a running emulator with the "re-run" hightlighted below.

Android Studio Restart Activity Button

If your Android emulator crashes on the first try like mine did with something like The emulator process for AVD Pixel_3a_API_30_x86 was killed, this youtube video was super helpful. For me the problem was disk space, the AVD needs 7GBs of disk space to start so I had to clean out some junk on the laptop 😅

Building Your Canvas Game

The dev cycle is pretty slick, run npm cap copy android to move your built JS living in the www to the right android folder. The default app looks like this after running it in the android emulator.

Default Capacitor screen on Android emulator

Setting Up Your JS Build

First let's setup our TypeScript by installing and creating an empty tsconfig.json

> npm install typescript --save-dev --save-exact
> npx tsc --init`
> npm install typescript --save-dev --save-exact
> npx tsc --init`

Recently I've been a big fan of parcel(v1) for quick and easy project setup, and it works great with excalibur also webpack is cool too if you need more direct control of your js bundling.

> npm install parcel --save-dev --save-exact
> npm install parcel --save-dev --save-exact

I copied the generated manifest.json, index.html, and css/ folder out of the original generated www/ and put it into game/.

Folder structure of capacitor frontend project

We need to setup our development and final build script in the package.json. The npm "start" script tells parcel to run a dev server and use game/index.html as our entry point to the app and follow the links and build them (notice the magic inline <script type="module" src="./main.ts"></script>) ✨

html
<!DOCTYPE html>
<html lang="en" dir="ltr">
<head>
<meta charset="UTF-8">
<title>Game Test</title>
<meta name="viewport" content="viewport-fit=cover, width=device-width, initial-scale=1.0, minimum-scale=1.0, maximum-scale=1.0, user-scalable=no">
<meta name="format-detection" content="telephone=no">
<meta name="msapplication-tap-highlight" content="no">
<link rel="manifest" href="./manifest.json">
<link rel="stylesheet" href="./css/style.css">
</head>
<body>
<script type="module" src="./main.ts"></script>
</body>
</html>
html
<!DOCTYPE html>
<html lang="en" dir="ltr">
<head>
<meta charset="UTF-8">
<title>Game Test</title>
<meta name="viewport" content="viewport-fit=cover, width=device-width, initial-scale=1.0, minimum-scale=1.0, maximum-scale=1.0, user-scalable=no">
<meta name="format-detection" content="telephone=no">
<meta name="msapplication-tap-highlight" content="no">
<link rel="manifest" href="./manifest.json">
<link rel="stylesheet" href="./css/style.css">
</head>
<body>
<script type="module" src="./main.ts"></script>
</body>
</html>

In this setup I'm sending all my built output with --dist-dir into the www directory, which is what capacitor will copy to android. I went ahead and deleted the provided default app in the www directory.

json
/* package.json */
{
"name": "my-cool-game",
"scripts": {
"start": "parcel game/index.html --dist-dir www",
"typecheck": "tsc -p . --noEmit",
"build": "parcel build game/index.html --dist-dir www"
}
...
}
json
/* package.json */
{
"name": "my-cool-game",
"scripts": {
"start": "parcel game/index.html --dist-dir www",
"typecheck": "tsc -p . --noEmit",
"build": "parcel build game/index.html --dist-dir www"
}
...
}

Vanilla Canvas code

To start with I have a really awesome game that shows the fps and a red square. This shows how get started from scratch with the HTML Canvas.

typescript
// main.ts
const canvas = document.createElement('canvas') as HTMLCanvasElement;
const ctx = canvas.getContext('2d') as CanvasRenderingContext2D;
canvas.height = window.innerHeight;
canvas.width = window.innerWidth;
document.body.appendChild(canvas);
let lastTime = performance.now();
const mainloop: FrameRequestCallback = (now) => {
const delta = (now - lastTime)/1000;
lastTime = now;
ctx.fillStyle = 'blue';
ctx.fillRect(0, 0, canvas.width, canvas.height);
ctx.font = '50px sans-serif';
ctx.fillStyle = 'lime';
ctx.fillText((1/delta).toFixed(1), 20, 100);
ctx.fillStyle = 'red';
ctx.fillRect(canvas.width/2, canvas.height/2, 40, 40);
requestAnimationFrame(mainloop);
}
mainloop(performance.now());
typescript
// main.ts
const canvas = document.createElement('canvas') as HTMLCanvasElement;
const ctx = canvas.getContext('2d') as CanvasRenderingContext2D;
canvas.height = window.innerHeight;
canvas.width = window.innerWidth;
document.body.appendChild(canvas);
let lastTime = performance.now();
const mainloop: FrameRequestCallback = (now) => {
const delta = (now - lastTime)/1000;
lastTime = now;
ctx.fillStyle = 'blue';
ctx.fillRect(0, 0, canvas.width, canvas.height);
ctx.font = '50px sans-serif';
ctx.fillStyle = 'lime';
ctx.fillText((1/delta).toFixed(1), 20, 100);
ctx.fillStyle = 'red';
ctx.fillRect(canvas.width/2, canvas.height/2, 40, 40);
requestAnimationFrame(mainloop);
}
mainloop(performance.now());

Vanilla js game running in Android emulator

Using Excalibur🗡

Using the Excalibur engine with capacitor and parcel will be a breeze! Really any web based game engine could be substituted here if you want. Here is the source on github!

> npm install excalibur --save-exact
> npm install excalibur --save-exact

Update the main.ts with some Excalibur

typescript
import { Actor, DisplayMode, Engine, Input, Loader, ImageSource } from "excalibur";
const game = new Engine({
displayMode: DisplayMode.FillScreen,
pointerScope: Input.PointerScope.Canvas
});
const sword = new ImageSource('assets/sword.png');
const loader = new Loader([sword]);
game.start(loader).then(() => {
game.input.pointers.primary.on('move', event => {
const delta = event.worldPos.sub(actor.pos);
actor.vel = delta;
// Original asset is at a 45 degree angle need to adjust
actor.rotation = delta.toAngle() + Math.PI/4;
});
const actor = new Actor({
x: game.halfDrawWidth,
y: game.halfDrawHeight,
width: 40,
height: 40
});
actor.graphics.use(sword.toSprite());
game.add(actor);
});
typescript
import { Actor, DisplayMode, Engine, Input, Loader, ImageSource } from "excalibur";
const game = new Engine({
displayMode: DisplayMode.FillScreen,
pointerScope: Input.PointerScope.Canvas
});
const sword = new ImageSource('assets/sword.png');
const loader = new Loader([sword]);
game.start(loader).then(() => {
game.input.pointers.primary.on('move', event => {
const delta = event.worldPos.sub(actor.pos);
actor.vel = delta;
// Original asset is at a 45 degree angle need to adjust
actor.rotation = delta.toAngle() + Math.PI/4;
});
const actor = new Actor({
x: game.halfDrawWidth,
y: game.halfDrawHeight,
width: 40,
height: 40
});
actor.graphics.use(sword.toSprite());
game.add(actor);
});

Note, depending on your emulator settings you may need to tweak it's graphics settings and restart Android Studio for it to build and run (This works out of the box fine on real hardware tested in BrowserStack, for some reason the emulator graphics can be confused)

Update graphics support

Tada! 🎉

Animated gif of excalibur sword running with Capacitor in Android

Hope this helps you web game devs out there!

-Erik

· 6 min read
Erik Onarheim

After the winter break, the team has released Excalibur@v0.25.2 with a lot of improvements to the core engine and plugins! Check the roadmap for our current plans.

Check out the new version on npm!

> npm install excalibur@0.25.2
> npm install excalibur@0.25.2

"Winter holiday, when developers work on their side projects" - Anonymous Coworker

Dev tools

> npm install @excaliburjs/dev-tools
> npm install @excaliburjs/dev-tools

We've built a new tool to help debug Excalibur games! This tool lets you see information about the Excalibur engine, scenes, actors, clocks, and more!

Debugging why things aren't working has historically been pretty difficult. This plugin will greatly assist in the game development cycle. Nearly everything is available and configurable.

It's pretty low effort to install into your game:

typescript
import { DevTool } from '@excaliburjs/dev-tools';
const game = new ex.Engine({...});
const devtool = new DevTool(game);
typescript
import { DevTool } from '@excaliburjs/dev-tools';
const game = new ex.Engine({...});
const devtool = new DevTool(game);

Excalibur dev tools, a sidebar of sliders and graphs on the right, with bounding boxes around all Actors in the game

Tiled updates

> npm install @excaliburjs/plugin-tiled
> npm install @excaliburjs/plugin-tiled

The Tiled plugin now implicitly adds a z-index to each layer (which can be overridden) which means things will look as you expect in Excalibur as they do in the Tiled editor.

Set the starting layer z (defaults to -1) and get gaming!

typescript
const map = new TiledMapResource('path/to/map.tmx', { firstLayerZIndex: -2 });
typescript
const map = new TiledMapResource('path/to/map.tmx', { firstLayerZIndex: -2 });

A side-by-side: on the left, a game with a blue square traveling along city roads. the right side is the level in a tiled map editor

Renderer performance improvements

The performance gains were achieved through some core renderer refactors and identifying places where expensive calculations could be cached!

This is huge, we stay above 30fps in the 4000 actor benchmark, and we have dramatic improvement in average fps in both cases!

Excalibur v0.25.0 vs v0.25.2 benchmarks showing that v0.25.2 has much more consistent average FPS

This benchmark was performed in Chrome on a Surface Book 2 with the power plugged in.

  • Processor: Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz, 2112 Mhz, 4 Core(s), 8 Logical Processor(s)
  • Physical Memory: (RAM) 16.0 GB
  • Graphics: NVIDIA GeForce GTX 1060

A number of improvements were made to the Excalibur graphics systems to get to this performance. The big factors to this improvement were:

  1. Avoiding recalculation of graphics transforms and other expensive operations when they can be cached
  2. Refactoring the renderer to be simpler and to use index buffers to share geometry vertices.
  3. Rendering batches at the actual maximum for the batch renderer
  4. Avoid recreating Matrix types, they are somewhat expensive to create then garbage collect

Post processing

The postprocessor improvements allow custom WebGL shaders, which can produce some cool effects! (Minimally modified from this ShaderToy)

Excalibur example running with a CRT television postprocessor

To produce the above effect, Excalibur has a new built in ScreenShader type for doing quick shaders meant for the whole screen.

typescript
class CrtPostProcessor implements ex.PostProcessor {
private _shader: ex.ScreenShader;
initialize(gl: WebGLRenderingContext): void {
const crtEffectSource = document.getElementById("modified-crt-shader-source").innerText;
this._shader = new ex.ScreenShader(crtEffectSource);
}
getLayout(): ex.VertexLayout {
return this._shader.getLayout();
}
getShader(): ex.Shader {
return this._shader.getShader();
}
}
game.graphicsContext.addPostProcessor(new CrtPostProcessor());
typescript
class CrtPostProcessor implements ex.PostProcessor {
private _shader: ex.ScreenShader;
initialize(gl: WebGLRenderingContext): void {
const crtEffectSource = document.getElementById("modified-crt-shader-source").innerText;
this._shader = new ex.ScreenShader(crtEffectSource);
}
getLayout(): ex.VertexLayout {
return this._shader.getLayout();
}
getShader(): ex.Shader {
return this._shader.getShader();
}
}
game.graphicsContext.addPostProcessor(new CrtPostProcessor());

Renderer improvements

Renderer design

When v0.25.0 was released, it was a "monolithic" renderer design, meaning everything Excalibur could possibly draw was built into a single renderer and shader program. This became onerous fairly quickly. And as the old adage goes: "you don't know how to build something until you've built it twice".

With v0.25.2, each type of drawing is split internally into separate renderer plugins. While this does come with some overhead when switching shader programs, it's worth it for the the simplicity, maintainability, and extensibility benefits.

Image filtering

Excalibur now allows you the ability to control the WebGL image filtering mode both implicitly and explicitly. Really this means Excalibur will try to pick a smart default, but allows overrides

Explicitly when loading ex.ImageSource:

typescript
const myImage = new ex.ImageSource('path/to/image', false, ex.ImageFiltering.Pixel);
typescript
const myImage = new ex.ImageSource('path/to/image', false, ex.ImageFiltering.Pixel);
  • ex.ImageFiltering.Blended - Blended is useful when you have high resolution artwork and would like it blended and smoothed

    Example of blended mode, where the edges of pixels are smoother

  • ex.ImageFiltering.Pixel - Pixel is useful for pixel art when you do not want smoothing aka antialiasing applied to your graphics.

    Example of pixel mode, where the pixels remain jagged

Implicitly if the ex.EngineOption antialiasing property is set:

  • antialiasing: true, then the blend mode defaults to ex.ImageFiltering.Blended
  • antialiasing: false, then the blend mode defaults to ex.ImageFiltering.Pixel

Custom renderer plugins

Excalibur knows how to draw many types of graphics to the screen by default comes with those pre-installed into the ExcaliburGraphicsContext. However, you may have a unique requirement to provide custom WebGL commands into Excalibur, this can be done with a custom renderer plugin.

A custom renderer can be registered with Excalibur and draw in any draw routine! Read more in the docs about custom rendere plugins

typescript
const game = new ex.Engine({...});
export class MyCustomRenderer extends ex.RendererPlugin {
public readonly type = 'myrenderer';
...
}
game.start().then(() => {
// register
game.graphicsContext.register(new MyCustomRenderer());
});
// call from a graphics callback or event
const actor = new ex.Actor({...});
actor.graphics.onPostDraw = (graphicsContext) => {
graphicsContext.draw<MyCustomRenderer>('myrenderer', ...);
}
typescript
const game = new ex.Engine({...});
export class MyCustomRenderer extends ex.RendererPlugin {
public readonly type = 'myrenderer';
...
}
game.start().then(() => {
// register
game.graphicsContext.register(new MyCustomRenderer());
});
// call from a graphics callback or event
const actor = new ex.Actor({...});
actor.graphics.onPostDraw = (graphicsContext) => {
graphicsContext.draw<MyCustomRenderer>('myrenderer', ...);
}

Community

We've had a lot of community engagement this iteration, especially through the issues and github discussions. Lots of good issues, and lots of cool things in the show and tell

Big thanks to everyone who helped with this release:

  • @ivasilov
  • @luttje
  • @tsanyqudsi
  • @lampewebdev
  • @joshuadoan
  • @berkayyildiz
  • @simon-jaeger
  • @YJDoc2
  • @JumpLink

The future

We are progressing at full speed toward the v1 vision, there is still a lot to do but the end is in sight. Here are a few things that I'm personally really excited for:

  • Event system redo
  • Particle system refactor
  • Final deprecation of old drawing api
  • New TileMap enhancements for hexagonal and isometric maps

This was a point release, but despite that a lot of exciting things were added! Looking forward to v0.26.0!

-Erik

· 11 min read
Erik Onarheim

After a year of work, a lot of great additions and improvements have made it into Excalibur, and we are making good progress towards our v1.0 release! Check the development roadmap for our current plans. It's hard to believe how different things are now since the first commit of Excalibur (back when it was called GameTS)!

Excalibur started as a tech demo in a presentation to show how powerful TypeScript can be. The engine has come so far since then, it's really amazing!

We are really excited to share this release with you! This release contains over 30 bug fixes and 50 new features! It's been a labor of love over the last year by many people, and we have some big features to share.

Check out the official release!

npm install excalibur@0.25.0

Performance

There is a combination of features (mentioned below) that resulted in big performance gains. Across the board, there's been a dramatic increase in what Excalibur can do in v0.25.0 vs v0.24.5.

In the gif below, we demonstrate the graphics performance specifically.

4000 small robot Actors (no collisions) exploding outwards from the center of the screen

There is much better performance across the board with a higher baseline FPS in v0.25.0 for the same number of actors. You'll notice that FPS improves over time as more actors are offscreen in v0.25.0 compared to v0.24.5.

graphs showing an average improvement of 8 FPS for 1000 Actors, 24.75 FPS for 2000 Actors, and 21.27 FPS for 3000 Actors

This benchmark was performed in the Chrome browser on a Surface Book 2 with the power plugged in.

  • Processor: Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz, 2112 Mhz, 4 Core(s), 8 Logical Processor(s)
  • Physical Memory: (RAM) 16.0 GB
  • Graphics: NVIDIA GeForce GTX 1060

New plugin versioning strategy

We are adopting a similar versioning strategy to Angular, during pre-1.0. All plugins compatible with the core library will share the same prefix through the minor version. For example, if core Excalibur is excalibur@0.25.0, then the plugins that support that version are formatted like @excaliburjs/plugin-tiled@0.25.x.

DisplayMode updates

Excalibur DisplayModes have been refactored and renamed to clarify their utility.

  • FillContainer - Fill the game viewport to take up as much of the immediate parent as possible
  • FillScreen - Fill the game viewport to take up as much of the screen as possible
  • FitContainer - Fit the game maintaining aspect ratio into the immediate parent
  • FitScreen - Fit the game maintaining aspect ration into the screen
  • Fixed - Specify a static size for the game width/height

Refactor to Entity Component System (ECS) based architecture

The core plumbing of Excalibur has been refactored to use an ECS style architecture. However, developers using Excalibur do not need to know or care about the this underlying change to ECS if they don't want to.

What does ECS mean for Excalibur? At a high level, ECS architecture breaks down into three things:

  • Components contain data needed for various systems.
  • Systems implement the "behavior" by looping over entities that match a list of components.
    • For example, the graphics system processes all entities with a TransformComponent and a GraphicsComponent
  • Entities are the "holders" of components

Actor, Scene, and Engine remain as the familiar interface to build games; they're only implemented differently under-the-hood. The reason for the change was to break down ever-growing and complex logic that had accumulated in the Actor and Scene implementations into Components and Systems for maintainability. This change increases the flexibility of Excalibur, and allows you to add new novel behavior directly into the core loop with custom components ones if you desire.

Excalibur does not have the purest implementation of an ECS by design; our built-in components are more than just data. The built-in components do provide behavior, convenience features, and helper functions to maintain our core mission of keeping Excalibur easy to use. The Excalibur core team goal with ECS is flexibility and maintainability, not performance. If you wish, you can read more about our goals for ECS.

Here's A quick example of using the new ECS features:

typescript
class SearchComponent extends ex.Component<'search'> {
public readonly type = 'search'
constructor(public target: ex.Vector) {
super();
}
}
class SearchSystem extends ex.System<ex.TransformComponent | SearchComponent> {
// Types need to be listed as a const literal
public readonly types = ['ex.transform', 'search'] as const;
// Lower numbers mean higher priority
// 99 is low priority
public priority = 99;
// Run this system in the "update" phase
public systemType = ex.SystemType.Update
private _searchSpeed = 10 // pixels/sec
public update(entities: ex.Entity[], delta: number) {
for (let entity of entities) {
const target = entity.get(SearchComponent)!.target;
// ex.TransformComponent is a built in type
const transform = entity.get(ex.TransformComponent) as ex.TransformComponent;
const direction = target.sub(transform.pos);
const motion = direction.normalize().scale(this._searchSpeed);
// Moves these entities towards the target at 10 pixels per second
transform.pos = transform.pos.add(motion.scale(delta / 1000))
}
}
}
// Actors come with batteries included built in features
const actor = new ex.Actor({
pos: ex.vec(100, 100),
width: 30,
height: 30,
color: ex.Color.Red
});
actor.addComponent(new SearchComponent(ex.vec(400, 400)));
// Create a scene with your new system
const scene = new ex.Scene();
scene.world.add(new SearchSystem());
scene.add(actor);
typescript
class SearchComponent extends ex.Component<'search'> {
public readonly type = 'search'
constructor(public target: ex.Vector) {
super();
}
}
class SearchSystem extends ex.System<ex.TransformComponent | SearchComponent> {
// Types need to be listed as a const literal
public readonly types = ['ex.transform', 'search'] as const;
// Lower numbers mean higher priority
// 99 is low priority
public priority = 99;
// Run this system in the "update" phase
public systemType = ex.SystemType.Update
private _searchSpeed = 10 // pixels/sec
public update(entities: ex.Entity[], delta: number) {
for (let entity of entities) {
const target = entity.get(SearchComponent)!.target;
// ex.TransformComponent is a built in type
const transform = entity.get(ex.TransformComponent) as ex.TransformComponent;
const direction = target.sub(transform.pos);
const motion = direction.normalize().scale(this._searchSpeed);
// Moves these entities towards the target at 10 pixels per second
transform.pos = transform.pos.add(motion.scale(delta / 1000))
}
}
}
// Actors come with batteries included built in features
const actor = new ex.Actor({
pos: ex.vec(100, 100),
width: 30,
height: 30,
color: ex.Color.Red
});
actor.addComponent(new SearchComponent(ex.vec(400, 400)));
// Create a scene with your new system
const scene = new ex.Scene();
scene.world.add(new SearchSystem());
scene.add(actor);

Collision system improvements

The collision system has been significantly overhauled to improve the quality of the simulation and the stability of collisions. The core simulation loop "solver" has been redone to use an iterative impulse constraint solver, which provides a robust method of computing resolution that has improved performance and stability.

Collision intersection logic has now also been refactored to report multiple contact points at once. Multiple contacts improves the stability of stacks of colliders over single contact collisions (which can result in oscillations of boxes back and forth).

variously-sized rectangles being stacked one at a time on top of each other and not falling over (like they usually would without multiple contact point collisions)

Colliding bodies can now optionally go to sleep. This relieves some of the pressure on the collision solver and improves the stability of the simulation by not moving these objects if they don't need to move. Colliders can be started asleep before a player in a game might interact with them

a sleeping collisions demo, where a horizontal rectangle is dropped onto two parallel vertical rectangles; the wobbling ceases quickly, and the structure remains stable because the collisions went to sleep

New CompositeColliders now make it possible to combine Excalibur Collider primitives (PolygonCollider, CircleCollider, and EdgeCollider) to make any arbitrary collision geometry. These new composite colliders power the new TileMap cell collisions and also power the new ex.Shape.Capsule(width, height) collider.

a grid of red bricks with composite collider lines drawn around groups of multiple bricks at a time

The Capsule collider is a useful geometry tool for making games with ramps or slightly jagged floors you want a character to glide over without getting stuck. This collider also helps with any "ghost collisions" that you might run into under certain conditions in your game.

an image of two green circles connected on each outer side by two green lines. the structure is standing on a platform

CollisionGroups allow more granular control over what collides above and beyond collision type. Collsion groups allow you to create named groups of colliders like "player", "npc", or "enemy". With these groups, you can specify that players and enemies collide, player and npcs don't collide, and that npcs and enemies don't collide without needing to implement that logic in a collision event handler.

typescript
// Create a group for each distinct category of "collidable" in your game
const playerGroup = ex.CollisionGroupManager.create('player');
const npcGroup = ex.CollisionGroupManager.create('npcGroup');
const floorGroup = ex.CollisionGroupManager.create('floorGroup');
const enemyGroup = ex.CollisionGroupManager.create('enemyGroup');
// Define your rules
const playersCanCollideWith = ex.CollisionGroup.collidesWith([
playersGroup, // collide with other players
floorGroup, // collide with the floor
enemyGroup // collide with enemies
]);
const player = new ex.Actor({
collisionGroup: playersCanCollideWith
});
typescript
// Create a group for each distinct category of "collidable" in your game
const playerGroup = ex.CollisionGroupManager.create('player');
const npcGroup = ex.CollisionGroupManager.create('npcGroup');
const floorGroup = ex.CollisionGroupManager.create('floorGroup');
const enemyGroup = ex.CollisionGroupManager.create('enemyGroup');
// Define your rules
const playersCanCollideWith = ex.CollisionGroup.collidesWith([
playersGroup, // collide with other players
floorGroup, // collide with the floor
enemyGroup // collide with enemies
]);
const player = new ex.Actor({
collisionGroup: playersCanCollideWith
});

New graphics system

The new Excalibur graphics system has been rebuilt from the ground up with speed in mind. It is now built on a WebGL foundation with a built-in batch renderer. This means that Excalibur will batch up draw commands and submit the minimum amount of draw calls to the machine when the screen is updated. This dramatically improves the draw performance and also the number of things wec can display on screen (as noted in the benchmarks earlier).

For drawing hooks the ExcaliburGraphicsContext is replacing the browser CanvasRenderingContext2D. If you still need to do some custom drawing using the CanvasRenderingContext2D the new Canvas graphic can help you out.

typescript
const canvas = new ex.Canvas({
cache: true, // If true draw once until flagged dirty again, otherwise draw every time
draw: (ctx: CanvasRenderingContext2D) => {
ctx.fillStyle = 'red';
ctx.fillRect(0, 0, 200, 200);
}
});
actor.graphics.use(canvas);
typescript
const canvas = new ex.Canvas({
cache: true, // If true draw once until flagged dirty again, otherwise draw every time
draw: (ctx: CanvasRenderingContext2D) => {
ctx.fillStyle = 'red';
ctx.fillRect(0, 0, 200, 200);
}
});
actor.graphics.use(canvas);

TileMap and Tiled updates

Tiled is easily one of the best tools out there for building and designing levels for your game. It has certainly been a valuable tool in our toolbox. We have doubled down on our efforts to provide a first class Tiled integration with Excalibur via the excaliburjs/plugin-tiled. This work also involved a few improvements to the TileMap to improve it's graphics API and collision performance.

Check out the Tiled Excalibur Plugin!

  • Full support for the Tiled object model
  • Full support for all Tiled file types
  • Excalibur built ins
  • Not yet supported
    • Tiled Group Layers
    • Custom Tile colliders
    • Isometric/Hexagonal maps
    • Parallax

a blue square moving around a pixelated cityscape build in the Tiled map editor

Documentation

A lot of time was spent reviewing and improving our documentation. Part of this work was ensuring that the snippets don't go stale over time by building them in GitHub Actions.

Please check out the new and shiny doc site with new code examples at excaliburjs.com!

Testing

The Excalibur core repo now has WallabyJS enabled to improve the VS Code test development and debugging experience. Wallaby is a paid tool; because of that Excalibur will always also support the Karma based testing framework for official tests.

A useful update to excalibur-jasmine allows async matchers, which greatly simplifies checking image diffs in Jasmine unit tests.

typescript
it('should match images', async () => {
let engine = new ex.Engine({width: 100, height: 100});
await expectAsync(engine.canvas).toEqualImage('images/expectedcanvas.png', .99);
});
typescript
it('should match images', async () => {
let engine = new ex.Engine({width: 100, height: 100});
await expectAsync(engine.canvas).toEqualImage('images/expectedcanvas.png', .99);
});

A brand new integration test utility has been created called @excaliburjs/testing, which provides a quick way to drive Excalibur games with Puppeteer and do image-based snapshot testing.

typescript
// excalibur testing
test('An integration test', async (page) => {
// Check for the excalibur loaded page
await expectLoaded();
// Compare game to expected an expected image
await expectPage('Can check a page', './images/actual-page.png').toBe('./images/expected-page.png');
// Use puppeteer page object to interact
await page.evaluate(() => {
var actor = ((window as any).actor);
actor.pos.x = 400;
actor.pos.y = 400;
});
// Compare game to a new expected image
await expectPage('Can move an actor and check', './images/actual-page-2.png').toBe('./images/expected-page-2.png');
});
typescript
// excalibur testing
test('An integration test', async (page) => {
// Check for the excalibur loaded page
await expectLoaded();
// Compare game to expected an expected image
await expectPage('Can check a page', './images/actual-page.png').toBe('./images/expected-page.png');
// Use puppeteer page object to interact
await page.evaluate(() => {
var actor = ((window as any).actor);
actor.pos.x = 400;
actor.pos.y = 400;
});
// Compare game to a new expected image
await expectPage('Can move an actor and check', './images/actual-page-2.png').toBe('./images/expected-page-2.png');
});

running an interactive image integration test and showing the ability to update the expected image snapshot

Templates

There are a lot of different ways to build web apps; we've created repo templates for some of the popular ones:

Samples

Community

We've had tons of community contributions since the last release. Heartfelt thanks to everyone in the discussions, issues and pull requests!

Contributors:

  • @jedeen
  • @kamranayub
  • @alanag13
  • @DaVince
  • @DrSensor
  • @djcsdy
  • @catrielmuller
  • @AndrewCraswell
  • @miqh
  • @rledford
  • @SirPedr
  • @helloausrine
  • @dpayne5
  • @herobank110
  • @didii
  • @Charkui
  • @muirch
  • @rumansaleem
  • @mogoh
  • @kala2
  • @MrBartusek
  • @josh-greenlaw
  • @LokiMidgard
  • @romaintailhurat
  • @EduardoHidalgo
  • @jaredegan

Breaking changes

There are some breaking changes in v0.25.0 from v0.24.5; see the changelog and release notes for more specifics, but they generally fall into the categories below. See the migration guide for guidance.

  • New APIs replacements
    • Graphics API
    • Actor drawing functions moved to graphics component
  • API renames for clarity
  • Bug fixed necessitated change
  • Extracted behavior to a plugin
    • Perlin noise is now offered as a plugin and is no longer included in the core library @excaliburjs/plugin-perlin
  • Big plugin changes
    • The Tiled plugin is now published under @excaliburjs/plugin-tiled and will start with version v0.25.0

Looking towards "version 1"

  • Pointer events plumbing refactor; the current system is hard to follow and debug/enhance
  • Particle system refactor
  • Graphics enhancements to support advanced postprocessing/shaders
  • ExcaliburGraphicsContext enhancements to grant more flexibility
  • Event system redo
  • Better Scene management and granular asset loading
  • Expand and enhance TileMap
  • Progressive WebAssembly enhancements in the physics simulation
  • Potential new plugins on the horizon
  • AI patterns and plugins like A* search
  • API finalization

I want to thank everyone who helped make this version of Excalibur possible. A lot of effort went into it and I'm really proud of what we achieved.

- Erik

· 2 min read
Erik Onarheim

This is a big release for Excalibur on our journey to 1.0.0. If you’d like to follow along, we now have a tentative roadmap available! The goal for this release was to simplify our collision infrastructure and utilities.

Thanks to our community contributors for all of their help! (see the full release notes)

Notable highlights

  • Collision groups have been re-implemented to be more in line with industry practice. They allow you to determine which colliders collide with others.
  • Collision behavior and properties are now contained within the new type ex.Collider
    • Collision types are now sourced from ex.Collider
    • Collision groups now live on ex.Collider
    • Collision shapes dictate collision geometry live on ex.Collider
    • Collision pixel offset allows shifting of colliders by a pixel amount
    • Properties like mass, torque, friction, inertia, bounciness are now all part of ex.Collider instead of ex.Body
  • Decoupling Actor from the collision system
    • ex.CollisionPair now works on a pair of Colliders instead of a pair of Actors to represent a potential collision
    • ex.CollisionContact now works on a pair of Colliders instead of a pair of Actors to represent an actual collision
  • New helpful methods for colliders
    • Find the closest line between 2 colliders or shapes
    • ex.Actor.within now works based on the surface of the geometry, not the center of the object

animated gif demonstrating finding the closest lines between several shapes

  • Actions moveBy, rotateBy, and scaleBy have been changed to move an actor relative to the current position
    • This change makes implementing patrolling behavior moving 400 pixels left and right forever as easy as: actor.actions.moveBy(-400, 0, 50).moveBy(400, 0, 50).repeatForever();

repeated patrolling behavior demo for the above Actions code example, showing the Actor moving back and forth along a platform

  • Many name refactorings and deprecations to improve usability (see the full release notes)

New sample game

We have a new sample game to illustrate best practices when developing with Excalibur.

sample platformer animation, showing the player, a patrolling NPC, and patrolling enemies

Look forward to many more updates in the months ahead!

· 3 min read
Erik Onarheim
Jae Edeen
Kamran Ayub
Alan Grgic
Sean Igo

Play the Ludum Dare version of ‘Office Daydream’

screenshot showing the game: the lower half is various office mini games while the upper &quot;daydrem&quot; is a motorcycle platformer

What went well

Shorter workdays

We had the fortunate opportunity to get out of the city for a bit and take a vacation preceding the game jam. We wanted to take advantage of our time away from home, so we instituted regular work days (8 hours), rather than the 10-12 hour days we usually fall into the trap of doing . And surprise, it went great! Everyone was more relaxed, and we delivered a quality game in less time! It was easier for the team to focus on getting stuff done. We also managed to finish early, just ahead of the submission hour.

Art pipeline

the arm that indicates your clicking actions, shown in various skin tones

We did most of our work in Aseprite, with a little bit of Photoshop thrown in. A lot of the art in this game is simple shapes, and we recycled many of the backgrounds across the mini-games.

Brainstorming

the copy machine minigame, where the player matches the lit-up buttons to get the copy machine to work

The theme was announced at 8:00 pm in our time zone. We spent the evening hours brainstorming, picking a few to develop a little more, and then deciding on our favorite choice.

Scope pruning

office posters on a wall that say &quot;you should be working&quot; and &quot;synergy&quot;

We were ruthless at eliminating extras that tried to sneak in to the game. We had less time than we usually do, so we had to work efficiently. The resulting game is about half of the scope it had the potential to become, and we kept it under control.

What could have gone better

the stapling minigame, where you have to click on the various pages of a report in the correct order to staple and complete them

We had to spend some extra time ahead of the jam updating our game template and tools. We could have done this at any earlier point. It wasn’t too bad, but it did cut a bit into our relaxation time for the days preceding the jam.

We also struggled again with managing state in Excalibur. We’re working on incorporating this into the Excalibur engine to improve the development process.

timelapse of us working on our computers in a well-lit room with wood trim

Overall, this Ludum Dare went great. We look forward to playing all of the cool games that we’ve seen so far for LD41!

· 2 min read
Erik Onarheim

Five years in review

The first commit to Excalibur.js was published on January 5th, 2013. Since then, we’ve been working to build a game engine that’s easy to develop with and fun to use. Along the way, we put together a release pipeline, constructed a test suite, wrote a lot of documentation, and created a number of extensions and samples. Here’s a quick rundown of some of the numbers:

  • 103068 npm downloads
  • 1275 commits to core repository
  • 447 closed issues
  • 35 contributors
  • 17 releases

Future plans

There are some pretty big improvements coming up, and we’re looking forward to sharing those changes with you over the next year. We’re also working on a larger collection of samples and games to help new developers and showcase Excalibur’s capabilities. For a more detailed look, check out the roadmap.

Thank you

We want to extend our sincere thanks to everyone who has written code, opened an issue, posted in our forum, or made a game and let us know about it. This is a very fulfilling project, and seeing others contribute to and use Excalibur means a lot to us. Thanks for your support!

-The Excalibur.js team

· 6 min read
Erik Onarheim
Jae Edeen
Kamran Ayub
Alan Grgic
Sean Igo

screenshot of the game, showing a top-down 2d grocery store filled with customers

Play the LD version of ‘I Just Wanted Groceries’

This is our fifth time back for Ludum Dare. We had a full house again, and the experience was a lot of fun!

What went well

Preparation

screenshot of some of our Trello cards to keep track of tasks and info

In the few days before Ludum Dare, we made sure everything was ready. We set up version control, automatic deploys, and scripted tasks to help us build and develop the game. We ran into some problems during this setup, which is exactly why we do this early. These steps have become necessary for us before every game jam.

Brainstorming

The theme was announced at 8:00 P.M. our time, and we spent the entire rest of the evening brainstorming. We made sure not to settle on anything too quickly, and came up with as many ideas as possible. From those fifty or so possibilities we picked a handful that seemed interesting enough to build. An hour or two later, we’d thrown all but one of those out, and settled on “avoid talking to people someplace – grocery store”.

Prototyping

a whiteboard with a grocery store layout and various pathing arrows drawn on it

We built the first version of the game level on a dry erase board. This let us iterate on how a player would traverse it, as well as devise methods for pathfinding and item generation. Every time we’ve taken the time to do this step, we saved ourselves a load of heartache. Clearing up design issues is much simpler before the code has been written.

Art

the various food and supply items: canned tomatoes, chips, cereal, frozen pizza, steak, toilet paper, bread, bananas, and carrots

an example spritesheet for one of the character models

the background tileset for the grocery store

We had three team members working on art at different points in the weekend. We built the level, the characters, and the food items from scratch. It can be difficult to maintain a visual consistency when multiple people are drawing things; we mitigated a portion of this by standardizing on the “x11” palette built in to Aseprite, so at least all of our colors matched.

Sound

an audio waveform

We didn’t make our own music this time, but we did design most of the sound effects using littleBits and a guitar. We feel like we did a good job of unifying the soundscape and setting a cohesive mood with the audio.

Simple construction

a short timelapse of various stages of the game&#39;s development, where it&#39;s mostly just squares and lines moving around

One of the most useful things we do is enforce the restriction of building a “playable” game as soon as possible. It doesn’t need any fancy extras, it just needs to let the player interact with and experience it. We managed to get to that point by Sunday morning, which left us two full days to add all those cool extras. It also allowed us to play the game a lot and polish the rough edges.

Recycled code

We started our game with a Yeoman template we built to structure the basics for us. We also reused a number of code snippets that we had left over from other games, including animation code and player input logic. Every little bit of time we saved helped us build this game better than we could have otherwise.

Excalibur

We hardly encountered any actual bugs in Excalibur this time around. We did put together a long list of potential improvements, though, and look forward to incorporating those into the engine.

Using Tiled

a screenshot of our level loaded in the Tiled Editor

If you’re making a tile or grid-based game, Tiled is a great editor to build your levels in. We used it to define zones for our different grocery items to spawn in, as well as waypoints to define the shoppers’ movements.

Custom analytics

a heatmap of aggregated player movement throughout the grocery store

We’ve tracked analytics in our games before, but we wanted a little more granularity this time. We configured custom analytics with Azure functions, and were able to track whatever game properties we wanted.

Eating and sleeping

a deep dish pizza ready to be cooked in the oven

We ended each day after about 10:00 P.M. Ending early meant we could start early, and sleep is the best medicine for tired minds. We also cooked several meals instead of just getting fast food all the time. These two things were marked improvements from previous game jams.

Results

results: 77th overall, 88th in &quot;Fun&quot; category, 298th in &quot;Innovation&quot; category, 230th in &quot;Theme&quot; category, 328th in &quot;Graphics&quot; category, 38th in &quot;Humor&quot; category, 202nd in &quot;Mood&quot; category

Our results were pretty good! We scored highest in humor and fun, which was what we were aiming for. We’re glad people liked the game.

What didn’t go so well

Tiled plugin

We experienced a small complication with our custom Tiled plugin, due to a versioning issue with Excalibur. It wasn’t too difficult to fix, but it did slow us down a bit.

Bugs in Excalibur

While the bug count this jam was low, it still wasn’t zero. One day, perhaps, but not this time. If anything, it’s better we run into these things before other users do, in order to prevent frustration with the development experience.

Difficulty in pathfinding

It was a bit difficult to get exactly what we were looking for in so short a time span. We managed to achieve most of the desired results, but there are still a few rough edges. We’ll be looking at adding pathfinding support directly into Excalibur in the future.

Conclusion

Every time we do a restrospective, the “what went well” section takes more and more space away from the “what didn’t go so well” section. It’s really encouraging to see this become a more interesting and rewarding process as we make new games. Ludum Dare was a lot of fun, and we hope to participate again someday.

Thanks for reading!

· 2 min read
Erik Onarheim

Excalibur version 0.8.0 is now available! We have several new features in this release.

Fast body collision checking

Actors can now move much faster without fear of unexpectedly passing through other collision bodies.

visualization fo fast body collision checking: a ball heads towards a wall, but a line ahead of the ball detects that the ball may collide soon with the wall, and prevents it from accidentally passing through it

demo of fast body collision checking: projectiles are thrown around inside a box at high speeds and do not escape the box

New vector and line functionality

We’ve added a few helpful things to Line and Vector, including determining points, calculating distance, and a vector magnitude alias.

Debug statistics

We now have a utility from which Excalibur will provide useful statistics to help you debug your game. For now the stats are focused on Actors and specific frames; look for more helpful stats in future releases!

PhantomJS testing structure

Behind the scenes, we have new testing tools that will allow us to visually test complicated interactions on the canvas.

There were quite a few commits from the Excalibur community in this release. Thanks to FerociousQuasar and hogart for your contributions, and check out the full release notes for all of the details for this release.

· One min read
Erik Onarheim

Excalibur version 0.7.0 is now available! This is a very exciting milestone, as we have added a major feature!

New physics system

We’ve implemented a rigid-body physics system, complete with edges, circles, and convex polygon primitives. This enables you to build fully-featured physics games in Excalibur! Fear not, the old physics system is still around for you to use.

a demo of the new physics system, showing birds with a knight helmets being thrown into a tower of blocks to knock them over

Generic lerping and easing

Excalibur now has generic functions for lerping and easing!

the new Excalibur easing function autocompleting in a code editor

the results of the above code, causing a bird to move according to a cubic easing function

Code cleanup

We’ve removed a number of deprecated methods. Check the changelog for a complete list.

Contributing

We have improved our contributing document to make it easier to jump into Excalibur development. If you’re interested in helping out, read through our new Contributing documentation

Overall there were over 27 issues addressed in this release. Check out the full release notes for all of the details, including bug fixes and enhancements.

· 3 min read
Erik Onarheim
Jae Edeen
Kamran Ayub
Alan Grgic
Sean Igo
Ante Grgic

Hexshaper game screen: a witch flies a broom around a large room, dodging green projectiles and bats

Ludum Dare 35 is the fourth in the series for the Excalibur.js team. We piled five to seven people into one room for four days to make another game.

What went well

Workflow and toolset

We’ve continued to refine and improve the way we build games for jams. It’s important that everything “just works” as much as possible. We maintained the same continuous deployment process that we’ve used before to push to a live site, so it could be tested and played within a minute of being checked in. We also used a watch-and-compile task in Visual Studio Code to gain the same benefit while developing locally.

Art & sound

the witch, bat, heart, and torch art assets from the game

We had four people putting together art assets on and off throughout the weekend, and it turned out great. We used bfxr to create the sound effects, and a set of littleBits components to compose the background music. Once we had settled on the theming for the game, everything fell into place.

a set of littleBits electronic music components attached to a pair of headphones

Event scripting

We initially had a grand plan for introducing elements of Hexshaper, and as usual we had to set that aside and come up with a more practical solution that could be completed in the time remaining. We ended up pausing the game and moving the camera over to each portal as it opened and as the player successfully closed it, which ended up providing most of what we wanted.

Bugs

We only encountered a few bugs in Excalibur this time around, and they were all relatively straightforward to test and fix. It feels better to use the engine each time we do a game jam.

What didn’t go so well

Minimum viable game

the original prototype for Hexshaper, a spaceship surrounded by a green hitbox

We didn’t have a very clear vision of what we wanted the game to be this time around. Uncertainty translated into not really having a playable game until Monday. This delay was a stark departure from the last couple of games we’ve made, where we made a point to have something relatively complete by Saturday evening so we could iterate on it through the rest of the weekend.

Animations

There were a number of things that made interacting with the Excalibur animations API painful. Luckily, we didn’t lose too much time to them, and we now have an opportunity to improve that experience for future users.

Conclusions

  • Build a playable game as soon as possible
  • Look for alternative solutions that create most of what you want for much less work

Special thanks to all of the people who worked hard to make this game possible!

timelapse of a room full of people working on building Hexshaper

· 2 min read
Erik Onarheim

We’ve been steadily working on the newest release of ExcaliburJS, and it’s finally here! Version 0.5.0 brings with it many new features!

Controller support

controller support input detection

Excalibur now supports the HTML5 Gamepad API. Most modern controllers can be used as game input.

Z-indexing

demo of z-indexing, showing a robot moving in front of and behind a cactus

You can now specify layering for actors in your game. Higher index values draw on top of lower values.

Faster collision detection

Excalibur now uses an axis aligned bounding box tree for better performance during collision checks.

New documentation

demo of documentation search bar autocomplete

The Excalibur docs are now cleaner and easier to navigate. Use the search bar at the top to help you find what you’re looking for.

There are also a number of improvements and bug fixes to make Excalibur faster and easier to use. If you’re so inclined, check out the full release notes.

Releases are also available in Bower and NuGet; please reference the installation guide for more information. If you’re brand new, welcome! Check out the Getting Started guide to start working with Excalibur.

The main Excalibur branch is constantly being improved by the team. If you crave living on the edge, reference the edge documentation to keep up with what we’re working on. It is automatically updated with every commit.

If you’ve used Excalibur for a project, please send it our way so we can consider showcasing it on the website!

· 5 min read
Erik Onarheim
Jae Edeen
Kamran Ayub
Alan Grgic
Sean Igo

screenshot of a partially-played sweep stacks board, showing various colored swuared in stacked columns

Play the Ludum Dare version of Sweep Stacks

This game jam was the second Ludum Dare we've participated in. Our goal with Sweep Stacks was to build something fun and see how well we could work with a larger team (five people instead of the usual three).

What went well

Preparation

Given the problems we had last time with setup, we made sure that everyone prepared their development environments ahead of time, and brought over their computer equipment to set it up the day before. We also configured continuous deployment for our code using TravisCI and GitHub Pages. This ensured that every time we pushed a change to the game, it would update on the website and we could see that the game was working properly.

Brainstorming

We came up with a number of ideas for this jam, several of which everyone seemed to enjoy. Even after we had those concepts moderately well-formed, we kept trying to come up with more ideas. After we’d exhausted our collective creative capacities, we made sure everyone was on the same page and went forward with the idea we all liked the most. We used Trello for new ideas or issues that we encountered; it was incredibly helpful to organize everything, and we highly recommend it for game jams.

Scope

We made a concerted effort to keep the scope of this game small. The theme definitely helped with that as well. Once we had the initial mechanics drafted for matching and piece movement, we realized that we could actually do a physical prototype. We pulled out some poker chips and a checkers board, and played the game for a while. This was immensely helpful for quickly visualizing exactly how the game would work, and allowed us to check for potential problems without having to write any code. By keeping the scope small, the game was playable very early on in development, which allowed us a lot of time to tune the gameplay.

physical prototype of Sweep Stacks, using a checkerboard and various colors of poker chips

Testing

One of our team members, Sean, offered himself up to be our dedicated game tester for the weekend, and it was absolutely phenomenal how much it helped the development process. Coupling this with our continuous deployment meant that we encountered bugs or potential issues very quickly, and could either remedy or improve upon them easily. We also made a number of features easily configurable so we could test different board sizes, block distributions, and other changes.

Art & sound

Another team member, Alan, brought over his guitar, so we decided to try and use it for sound effects and music. After about an hour or so, we had the music and notes that you can hear in the game. They turned out great, and really added a lot to the atmosphere we were trying to create.

Earlier on during the weekend, we had tossed around the idea of a fantasy theme for the game. In the end, we decided on a simpler art style, which ended up looking really good, and helped us focus a bit more on the gameplay rather than on designing or incorporating more complicated assets.

Timelapse

We recorded timelapses on our computers while we worked, and also had a camera running on the room we were all working in. It was fun going back through the pictures and watching the game develop. We’re putting together a video or two of the process, but here’s a short teaser for now:

sample timelapse of us in the room we were all working from during the game jam

sample timelapse of various iterations of the game, showing graphics and layout improvements over time

What didn't go so well

Analytics

We used Google Analytics to keep track of scores and a few other stats. However, due to a limit on how many events you can send (one event per second after the first ten events), we can’t properly record all of the events if a user plays more than one game. Next time we’ll try a different analytics provider, or consider our own solution.

Hosting

Github Pages went down for some unplanned maintenance a few days after Ludum Dare was over. We didn’t have a fallback hosting solution set up, which meant that there was a fair amount of time where people simply couldn’t play the game. We now have an alert set up for our current hosting and a fallback site on Microsoft Azure ready to deploy if anything goes wrong.

Bugs

Excalibur was much more stable this time around, although we did encounter a few platform-specific issues for iOS and Windows Phone that we could have been aware of sooner if we’d playtested the game on those devices.

Color palette

Our final color palette ended up being very unfriendly towards color blind players. We’re currently working on different color selections for color blind modes, and we are definitely going to consider accessibility in our initial design decisions from now on.

Future plans

There has been a fair amount of interest in Sweep Stacks so far, and we've definitely had a lot of fun working on it, so we plan on continuing to develop and improve it further. You can play the most recent stable version of the game at playsweepstacks.com.

Conclusions

  • Create the smallest game you can make, then build on it from there
  • As soon as your game is playable, have someone play it
  • Have fun!

Ludum Dare 31 was an absolute delight, and we hope to be back again someday!

· 7 min read
Erik Onarheim
Jae Edeen
Kamran Ayub

It’s taken a while to get around to composing this from the notes we scribbled down after the jam, but here we go!

What went well

Teamwork

Overall, our team worked really well together, given that this was our first “high-stakes” deadlined project. Being able to work in the same physical space was a big part of our productivity over the weekend, and we were able to help each other with problems or changes quickly and effectively.

Planning

We felt it was important to spend an appropriate amount of time discussing ideas before we settled on making anything. This turned out to be several hours. We took a walk around the neighborhood and brainstormed ideas that would fit within the theme, eventually settling on a much more elaborate version of what would become our game.

Sleeping & eating

While Ludum Dare takes place within a limited time frame, we had no intention of staying awake for the entire duration. Overwork and sleep deprivation leads to inefficiency. We also made sure that we remembered to eat food at regular, human intervals. This helped maintain a positive mood and keep us from consuming each other and/or the neighbors.

Map editor

We decided to use Tiled to create our map. We spent a bit of time getting it to integrate with Excalibur, but being able to graphically edit everything in the level on the fly was definitely worth it.

Art & effects

animation of the kraken swimming across the screen on a blue background

Overall, our art process went better than expected. We leveraged an existing tileset for our geography and map background. We put together the ship and kraken sprites ourselves with Photoshop and Paint.net, and they turned out well with relatively few frames of animation. We used color blending to darken up the map, which really helped set the mood of the game. The ship spotlights were created using a radial gradient effect, which was pretty simple to do and looked great. Additionally, we added a little bit of camera shake into the game when the kraken attacks ships. This was easily the best payoff for the least amount of code.

Stats

The end-game score screen was a last-minute alternative to a boss fight that we cut from our scope. It ended up adding a good deal of replay value to the game, and encouraged players to come back and try to beat their previous score. We also hooked the game up to Google Analytics, which we think everyone should look into doing if they can. It helped give some insight into how people were playing the game, as well as give us an idea of how difficult the level was.

pie chart showing a 45.6% win rate for our players overall

table of win statistics: average damage taken: 61.53 (72 total events), average aggregate score: 39.42 (53 total events), average health gained: 32.92 (72 total events), average boats destroyed: 3.20 (74 total events)

table of defeat statistics: average damage taken: 120.38 (105 total events), average health gained: 20.38 (105 total events), average boats destroyed: 2.29 (105 total events)

TypeScript

If you’re developing a game using JavaScript, we recommend giving Typescript a try. Static typing really helped us during the rapid game-building process of Ludum Dare.

Testing Excalibur

One of the main goals we had in mind for this jam was to put our game engine through its paces. We were able to push the limits of Excalibur and find a number of opportunities for improvement. The more we do game jams like this, the more filled-out the engine should become.

What didn't go so well

Also testing Excalibur

On the same hand, we encountered several critical issues that halted game development for several hours each. Excalibur, still in early alpha, didn’t fully support a lot of the features we tried to use it for. While this was expected, we spent a lot of time fixing bugs and adding features to the engine instead of working on the game. Next time, we plan on prioritizing quick workarounds when we’re in a time crunch.

Deadlines

We often didn't stick to our self-imposed deadlines. For example, we had planned on halting development several hours before the submission time, but we ended up working until fifteen minutes prior to the end of the jam. In the future, we definitely need to timebox better and set more realistic goals around task completion.

Playtesting

As a result of ignoring all of our deadlines, we hardly did any playtesting of the full level. While this luckily wasn’t a huge issue in the end, it had the potential to be absolutely disastrous.

Game controls

The game ended up with slightly unintuitive player controls. The kraken followed the player’s mouse pointer, but we required you to press the spacebar to attack; we should have just used mouse clicks for attacking the ships. We also only played the attacking animation when the kraken was within range of a ship; while this contextual logic was a cool idea initially, it ended up being confusing for players. In addition, the kraken would spin wildly on occasion when attacking ships, which we affectionately referred to as “Spinning Squid Syndrome”. While this rotation was somewhat intentional (it was a workaround to avoid doing a lot more sprite animation), it definitely needed some fine tuning.

Another surprise for us was that many of the players we talked to were much more interested in sneaking around the ships than attacking them. We didn’t really reward this in the ending score screen, as we had always assumed everyone would want to attack the ships.

Tools & process

We encountered a problem with deploying the game to Github Pages. With very little time left until submission, we all vaguely thought we were doomed. Luckily, we were able to deploy straight from Visual Studio with Azure publishing, which allowed us to move forward!

Improvements for next time

Know the tools

We had never really used Tiled before, and while it was definitely helpful, it took some getting used to. Next time, we’ll use all of our development tools beforehand to gain some familiarity with them.

Test the process

In the same vein, we should have tested the entire development process on a small scale, end to end. We could have set up the code repository, ran through a sample game to test the workflow, and deployed it to make sure the entire pipeline worked before the jam started.

Work around issues with Excalibur

While discovering issues with our game engine is an important goal for us, it shouldn’t get in the way of finishing the game. The next time we encounter a show-stopping engine bug, we’ll consider changing the mechanics or creating a simple workaround rather than dropping everything to fix it. For example, we spent hours smoothing ship rotations, when we could have just had them snap to their new travel direction.

Define the scope more clearly

While we did a pretty good job of cutting features and scope from the project as we went along, it would have been better to cut those things earlier; there were several things (boss battles, different enemy types, etc.) that we still planned on implementing even when we didn’t really have any time to do so.

Add more stats

We plan on adding even more stats and analytics from now on. We could have kept track of player pathing information to see if there were any problems with the level design, or gotten more insight into the play style choices that everyone was making.

Future plans

We have been working a little bit in our free time to clean up the game code and add more features. It would be really cool to add more of our original scope back into the game now that we’re not under any time constraints. You can take a look at the latest branch of the repository to see how we’re doing.

Conclusions

  • Teamwork is key
  • Your scope is too damn big
  • Prepare your tools
  • Have an idea of where you’re going before you start

Overall, Ludum Dare 29 was an amazing experience, and we will definitely be back for another one sometime in the future.

· One min read
Erik Onarheim

We are very proud to announce Excalibur v0.2.0! There are tons of awesome new features!

Check out the full release notes on GitHub!

Release notes summary

  • Collision Map Implementation for building large static collidable levels
  • Support for redundant fallback sound sources for cross browser support
  • Particle Emitter Implementation
  • Trigger Implementation
  • Timer Implemenation
  • Camera Effects: zoom, shake
  • Polygon IDrawable
  • Alias ‘on’ and 'off’ for 'addEventListener’ and 'removeEventListener’
  • Optimized draw so only on screen elements are drawn
  • Support Scale in the x and y directions for actors
  • Added notion of collision grouping
  • New Events like 'enterviewport’, 'exitviewport’, and 'initialize’
  • Textures allow direct pixel manipulation
  • Static Logger improvements with ’.debug()’, ’.info()’, ’.warn()’ and ’.error()’
  • Added callMethod() action to actor
  • Added fade() action to actor
  • Added follow() and meet() action to actor

Installation options

  • Install with NugGet: Install-Package Excalibur
  • Install with npm: npm install excalibur
  • Install with bower: bower install excalibur